New Wide Rally Stripes added to website!

[Ridergraphix]

Just added these to the website. The Standard kit includes Hood, Below Grill and windshield Header Stripes. A tailgate stripe adder is an option. These are designed to wrap over the edge of each panel, and can be installed with No cutting on the vehicle. These can be installer Centered or Offset.

More Pics and Ordering info available here... https://ridergraphix.com/store/2021-up-Ford-Bronco-Wide-Rally-Stripe-Vinyl-Graphics-Kit-p427665749

Sponsored

 

[Jason]

I just had a flashback to the 1997 Viper GTS, blue with white stripe.

Looks good!

 

[Ridergraphix]

I just had a flashback to the 1997 Viper GTS, blue with white stripe.

Looks good!

Yeah, I was getting Shelby vibes while installing them... It's a classic Ford/Shelby color combo as well as the Viper GTS.

 

[A1A]

Yeah, I was getting Shelby vibes while installing them... It's a classic Ford/Shelby color combo as well as the Viper GTS.

I know you have above the body line retro stripes, but I was curious if you were thinking of creating retro hockey sticks that would go below the fender badge so it wouldn't need to be removed.

I might be interested in that....

 

[Ridergraphix]

I know you have above the body line retro stripes, but I was curious if you were thinking of creating retro hockey sticks that would go below the fender badge so it wouldn't need to be removed.

I might be interested in that....

We have multiple Side Stripes that do not interfere with the front fender badge. Problem is, how do you get the stripe from the upper front fender to below the badge without crossing it or removing it? You can see our full Bronco line here... https://ridergraphix.com/store/2021-FORD-BRONCO-GRAPHICS-c55391005

 

[Wide Open Roads]

I just had a flashback to the 1997 Viper GTS, blue with white stripe.

Looks good!

I came to say the exact same thing. Always loved the look. Will look good on Broncos, too!

 

[Busterbronco1]

We have multiple Side Stripes that do not interfere with the front fender badge. Problem is, how do you get the stripe from the upper front fender to below the badge without crossing it or removing it? You can see our full Bronco line here... https://ridergraphix.com/store/2021-FORD-BRONCO-GRAPHICS-c55391005

how about a "ghost" stripe option? one that is just a hare shade off or a different sheen but same color?

 

[Ridergraphix]

how about a "ghost" stripe option? one that is just a hare shade off or a different sheen but same color?

That can be done by choosing a color close to your paint color based on personal preference. A color chart that includes all available standard and special order colors is available here…https://ridergraphix.com/store/COLOR-CHART-c33248495

Sponsored