NJ/NY/Delaware/Eastern Pa./MD/Ct Volume Buyers?

[acnp2022]

Mmmmm cyber orange....

Got her first scrub down today. Planning to ceramic coat it soon when I find the time. Took me a full day and a half to do my Tacoma

I will just leave my bronco dirty and just let the rain clean it

Sponsored

 

[Rob1135ny]

https://thebronconation.com/forums/...ail-since-the-edsel”-by-hoovie’s-garage.6348/

 

[BroncoPA65]

Baja Designs Fog Light Kit Full Install on First Edition.

I really like this light setup. I think I might get this... one day... when I have somewhere to install it!

 

[Merc4x4]

I really like this light setup. I think I might get this... one day... when I have somewhere to install it!

I'm leaning towards the Diode Dynamics. They have more options and appear brighter in road legal configurations. I'm thinking amber pro fogs and amber pro driving.

 

[Rob1135ny]

Hope everyone has a great day today! I know this is a Bronco board but today may we never forget the hero’s on this day and all the people who were lost on this day as well as people still passing away from 9/11 illnesses! God Bless the USA!

 

[Tor148]

So one of my projects today. I made a 4 tire deflation/inflation rig.

Got all the parts from amazon. Ran about $190.00. You can deflate with the red handle valve, and inflate with an air hose or using the schrader on the other side. I included an shut off valve to the gauge so if I use a power tank and it wont blow up the gauge.

I used brass barbed tees, and single ear hose clamps.

The ends lock on the vavle stem and seal when you remove them so you dont loose any pressure on the other tires.

Works well testing in the garage!! But think it will be great in the field. Much easier to deflate and inflate all tires at the same time, which is also nice to keep them all the same pressure.

I took a old flat bungee cord strapped to it so it will have a hook to hang from the grill or anywhere as it works!

I am thinking of maybe plastic dip or some sort of rubber coating on everything so it can be placed on the hood or anywhere and not scratch anything.

 

[Rob1135ny]

14

 

[Johnny Mo]

So one of my projects today. I made a 4 tire deflation/inflation rig.

Got all the parts from amazon. Ran about $190.00. You can deflate with the red handle valve, and inflate with an air hose or using the schrader on the other side. I included an shut off valve to the gauge so if I use a power tank and it wont blow up the gauge.

I used brass barbed tees, and single ear hose clamps.

The ends lock on the vavle stem and seal when you remove them so you dont loose any pressure on the other tires.

Works well testing in the garage!! But think it will be great in the field. Much easier to deflate and inflate all tires at the same time, which is also nice to keep them all the same pressure.

I took a old flat bungee cord strapped to it so it will have a hook to hang from the grill or anywhere as it works!

I am thinking of maybe plastic dip or some sort of rubber coating on everything so it can be placed on the hood or anywhere and not scratch anything.

How do you ensure equalized pressure across all 4 hose outlets - and ultimately at each tire?

 

[Tor148]

How do you ensure equalized pressure across all 4 hose outlets - and ultimately at each tire?

It's an open system, so it will actually balance itself.

 

[Johnny Mo]

It's an open system, so it will actually balance itself.

Nice

 

[Designkid]

Picked up my security drawer and a couple other small stuff at Brewster today. Drawer is much more robust and nicer from what I was expecting. Heavy as shit too. Install went pretty well except when I went to reinstall the lasso tie downs. The bolts they supplied were really tough to fully tighten to the point I broke off the nut welded onto the unit. Oh well I'll need to look at buying some new tie downs sometime because these sure as hell aren't coming off again.

 

[acnp2022]

Picked up my security drawer and a couple other small stuff at Brewster today. Drawer is much more robust and nicer from what I was expecting. Heavy as shit too. Install went pretty well except when I went to reinstall the lasso tie downs. The bolts they supplied were really tough to fully tighten to the point I broke off the nut welded onto the unit. Oh well I'll need to look at buying some new tie downs sometime because these sure as hell aren't coming off again.

Yea it's nice. Definitely not a piece of shit. Had to make some adjustments to get it to fit with the enclosure

 

[Designkid]

Yea it's nice. Definitely not a piece of shit. Had to make some adjustments to get it to fit with the enclosure

With your infamous hammer I'm guessing

 

[acnp2022]

With your infamous hammer I'm guessing

That was there as a last resort

 

[Bronc-OH]

Yea it's nice. Definitely not a piece of shit. Had to make some adjustments to get it to fit with the enclosure

With the hammer right ?

Sponsored