Non-Sasquatch Badlands Cyber Orange featuring Rigid, Baja Designs, Bronco Depot, Fuel and Toyo

[dhitesman]

Love where you put the new badges. It’s the only place they look good. It’s almost like that’s where they’re supposed to be.
I’m digging the rear spots as well.

Nice look rig!

The rear spots are fantastic. Great light when in reverse. Separate upfitter control. Tapped into rear upfitter access point for easy install. @4x4TruckLEDs.com makes it really easy with their kit - the brackets they supply are perfect!

Sponsored

 

[4x4TruckLEDs.com]

The rear spots are fantastic. Great light when in reverse. Separate upfitter control. Tapped into rear upfitter access point for easy install. @4x4TruckLEDs.com makes it really easy with their kit - the brackets they supply are perfect!

Looks good. If you could do it again you would buy direct from Rigid? no no no, you'd buy from US We sell Rigid also

 

[dhitesman]

Looks good. If you could do it again you would buy direct from Rigid? no no no, you'd buy from US We sell Rigid also

OP edited accordingly. You are now my sole source for lighting!

 

[UncleBuck]

May be a dumb question, where is everyone getting the "Bronco" badges?

 

[jikozi]

Looks fantastic!

 

[jikozi]

May be a dumb question, where is everyone getting the "Bronco" badges?

there might be other places, but one is www.broncodepotusa.com

 

[thecaptain]

Following, in large part because I have a Badlands non-Squatch ordered as well. Your Bronco looks terrific.

 

[Rickperry]

Badass build!
Thanks for sharing!

 

[Dom]

Are the a-pillars the 4in rigids? I didn't realize you had to scoot the bracket all the way to the outside on the passenger side for that size pod.

 

[bytheway]

For the same price, if a product has a function, I don't like that it was disabled. Besides I think the backlight looks cool. Some may not.

I bought the Ford lights initially. Sent them back after I realized the back light was disabled. The only good part is the Ford performance covers. The “wiring kit” the include is a joke. I’m a Rigid dealer anyway so I saved money getting the 4” white backlit in drive pattern. Wired the backlight to switch 6 and the main light to switch 5.

Here’s the backlight options for those who haven’t seen them.

 

[dhitesman]

Are the a-pillars the 4in rigids? I didn't realize you had to scoot the bracket all the way to the outside on the passenger side for that size pod.

They are the 4". Don't need to push all the way out but looked good to me, didn't obstruct even the smaller antenna, and it's not really a highway vehicle for me so I wasn't worried about extra wind noise by sticking out.

 

[CyberOrangeBadlands]

Sweet

Waiting on same build with a 2 door

 

[WantSumBronc]

Great looking build! Seems you have all the perfect mods, and they came together very well on a non sassy! I have a very similar build arriving very soon.

Curious about your wheels & the offset... Would you mind taking another photo that shows the “poke” more clearly? Thank you in advance, cool truck!

 

[4avor8ntfair]

Enjoying building out the new rig. For now, Ford Rigid A-pillar kit (if I did again, would buy the non-Ford Rigid version from @4x4TruckLEDs.com to get the backlight); Baja Designs Modular Bumper Kit / Rear Spots (THANK YOU @4x4TruckLEDs.com for the help, service, and dialogue!); Bronco Depot Badges; Craven Speed stubby Antenna; Fuel Zephyr 18x9 +1; Toyo ATIII. (Removed crash bars - zero rub).

.

This is basically my build too. That looks like the matte black fender badge? I’m thinking about the glossy one, bc I want to eventually paint the grille gloss black. Can’t go wrong either way!
I’m still torn on lights…especially bc I’ll probably upgrade to a winch bumper at some point. Baja has the cleanest looking kit for the bumper, but DD seems to have a better pattern fog light, and the SSC2’s can be had with a backlight as well.

 

[4avor8ntfair]

Enjoying building out the new rig. For now, Ford Rigid A-pillar kit (if I did again, would buy the non-Ford Rigid version from @4x4TruckLEDs.com to get the backlight); Baja Designs Modular Bumper Kit / Rear Spots (THANK YOU @4x4TruckLEDs.com for the help, service, and dialogue!); Bronco Depot Badges; Craven Speed stubby Antenna; Fuel Zephyr 18x9 +1; Toyo ATIII. (Removed crash bars - zero rub).

.

I do love that you fit 35’s without a lift! Please update with your experience off-roading and if there’s any rubs!

Sponsored