Offsets that work with 37s on Sasquatch with 2” lift?

[Badassbronco]

I’m looking to get a wider stance than the +30mm factory offset. I’m going to order Bora wheel spacers. Lift is a 2” perch collar lift.

I’ve read to go with 0mm offset. I do want a bit more “poke”. Would you like a slight negative offset work as well such as -5mm to -10mm?

Sponsored

 

[acetdeucy]

I’m looking to get a wider stance than the +30mm factory offset. I’m going to order Bora wheel spacers. Lift is a 2” perch collar lift.

I’ve read to go with 0mm offset. I do want a bit more “poke”. Would you like a slight negative offset work as well such as -5mm to -10mm?

If you're already going to add 1" spacers, then you're all done.

If you change wheels, with no spacer, then many people use a "0" offset to get a little poke.

 

[Badassbronco]

If you're already going to add 1" spacers, then you're all done.

If you change wheels, with no spacer, then many people use a "0" offset to get a little poke.

Ok great. My wheel spacers will be 30mm so that should be perfect then. Thank you

 

[Cysquatch]

I’m looking to get a wider stance than the +30mm factory offset. I’m going to order Bora wheel spacers. Lift is a 2” perch collar lift.

I’ve read to go with 0mm offset. I do want a bit more “poke”. Would you like a slight negative offset work as well such as -5mm to -10mm?

-12mm was the offset my buddy used on his 2-door WT running 37's. Looks good.

 

[Ramble_Offroad]

My Bronco has not arrived yet, so my comments below are not based on experience.

I’d stick with the 0 offset with a 2” lift over Sas with a 37” tire.

-12 offset would for sure give it a aggressive stance, but I think it will rub. Check out this guys YouTube, he has a 2” perch on a Sas with 37’s and his -12 offset wheels sound problematic.

Sponsored