IN STOCK! Triple LED Fog Light Kit for MOD Bumper from ORACLE Lighting

[tmarti13]

It is a pain, but if you use those nylon spacers from Lowes that a few of us used they should dial the lights right it. Total time less than an hour I think. You’ll be happy with them once the mod is done.

Thank you! Headed to Lowes now.

Sponsored

 

[BrandiwineOBX]

Yeah, it's frustrating and shouldn't be needed. I'm not sure how those who haven't adjusted them aren't having issue but installing the nylon washers from Lowes nailed it for me. Wish I had known about them before it had gone through adding washer to try to dial it in. Less than 30 minutes of work and you're good to go.

 

[F OR D]

Yeah, it's frustrating and shouldn't be needed. I'm not sure how those who haven't adjusted them aren't having issue but installing the nylon washers from Lowes nailed it for me. Wish I had known about them before it had gone through adding washer to try to dial it in. Less than 30 minutes of work and you're good to go.

what did you go with and where?

i really need to get the angle fixed...

 

[Dr.Ross]

what did you go with and where?

i really need to get the angle fixed...

Scroll back a few pages, it’s in this thread.

 

[j_anderson]

@ORACLE Lighting @JP_Oracle Can these be wired in a way so that say the inner light on each side runs off of the factory fog light switch and the outer two lights run on an aux switch?

Apologies if this has been answered in the thread already

 

[JP_Oracle]

@ORACLE Lighting @JP_Oracle Can these be wired in a way so that say the inner light on each side runs off of the factory fog light switch and the outer two lights run on an aux switch?

Apologies if this has been answered in the thread already

I suppose you could, but that would require separating the light emitters from the main harness and creating your own harness. We don't have instructions handy to do this.

 

[j_anderson]

I suppose you could, but that would require separating the light emitters from the main harness and creating your own harness. We don't have instructions handy to do this.

Got it. Thanks. I ordered the standard bumper in '21 so that I would have the factory fog switch with a plan to upgrade to the Mod bumper later.

My thought process here is to drive 1 or 2 of these lights with the factory switch gear then wire the outer one(s) to an aux switch. Kind of wanted to go with yellow outer lights and control them independently. I see the mix/match question was answered already.

Again, thanks of the reply

 

[JP_Oracle]

Got it. Thanks. I ordered the standard bumper in '21 so that I would have the factory fog switch with a plan to upgrade to the Mod bumper later.

My thought process here is to drive 1 or 2 of these lights with the factory switch gear then wire the outer one(s) to an aux switch. Kind of wanted to go with yellow outer lights and control them independently. I see the mix/match question was answered already.

Again, thanks of the reply

Happy to help!

 

[Sasquatch_CedarPark]

what did you go with and where?

i really need to get the angle fixed...

Please check Post #407 in this thread.

 

[Puddle Jumper]

Added the rubber spacers before installing on my OBX with 33” KO2’s. Happy with the finished look after installing factory fog light switch and activating the switch, etc using ForScan.

 

[astuart]

I took advantage of the Labor Day sale and Oracle shipped these very quickly but am disappointed with the quality of packing within the box. The foam that was suppose to separate the two light units must have gotten dislodged and now each light's paint is scratched and gouged. Sigh...

 

[BrandiwineOBX]

what did you go with and where?

i really need to get the angle fixed...

I apologize for not getting back to you sooner, I don't get on the forum a lot. After installing 3 washers on each light and still having issues, I ended up getting the nylon spacers from Lowes. Took off all the washers and added the the spacers, nailed it. No more on coming traffic flashing lights at me and don't feel like I'm illuminating the entire world.

 

[cdoublev]

Definitely something we can look into if there is a high enough demand!

I’m in for a pair if offered in amber. That’s the one thing pushing me to a different set. Please make this a reality!

 

[ORACLE Lighting]

I’m in for a pair if offered in amber. That’s the one thing pushing me to a different set. Please make this a reality!

Thank you for the feedback! Looking into this option.

 

[Slyder]

I'd also be interested if they were offered in amber.

Personally, I think it would be something to consider, since you're upcoming headlights have an amber option.

Sponsored