OP
OP
- Thread starter
- #61
$80
Sponsored
Sponsored
Race Red Wildtrak Build in KY
- Thread starter 7722 Bronco
- Start date
- Watchers 11
Badass rig OP
OP
OP
- Thread starter
- #63
Fast Intentions sill protectors and the Aeroskin Smoke hood shield.
OP
OP
- Thread starter
- #64
Had the Zone 1" leveling kit installed today. Very happy with the outcome. Excellent stance now.
Your ride look fantastic!!! We’ll done & congrats!!!
Sponsored
OP
OP
- Thread starter
- #66
Last piece that I had from all my accessories that I bought before the Bronco got here,, ARB rear diff cover installed. I like it.
I've looked at all the tailgate tables and have decided on the Trailgater by Outback Adventure Products. Like the idea of no drill and the slide out cutting board/extension and seems to be well liked by those that have it. It's inbound, just waiting on its arrival.
I've looked at all the tailgate tables and have decided on the Trailgater by Outback Adventure Products. Like the idea of no drill and the slide out cutting board/extension and seems to be well liked by those that have it. It's inbound, just waiting on its arrival.
OP
OP
- Thread starter
- #67
Took a clay bar to the hood and a little wax after,,, nice shine.
- First Name
- Tom
- Joined
- Aug 12, 2022
- Threads
- 8
- Messages
- 93
- Reaction score
- 124
- Location
- Connecticut USA
- Vehicle(s)
- What?
- Your Bronco Model
- Badlands
How much did you end up spending on your build? I'm getting ready to start mine as soon as it shows up, and I'm curious about how much I should consider. Wife gave me a $10K budget to build out my race red Badlands Sasquatch. Not sure I will go further on the lift or up to 37's, but maybe. I ordered the squatch, because I though it would likely do well enough for the wheeling I will do with it.Figured I'd start a build page for my Wildtrak that I hope to see any day.
I've got stuff in the basement and garage to go on it. Should have been delivered back in January, but like some of you, it went to Ice Mountain purgatory waiting on a chip module. Fast(SLOW) forward to 3/28 and I get a built notice with EDD of 4/5 - 4/11,,,,, 4/6 today and nothing yet, only 5.5 hours away from MAP. Hope I hear anytime from my dealer that it has arrived. I've given up on the trackers as they never seem accurate,,,, I'll just wait it out.
Now to the stuff,,,,
ADD Rock Fighter winch bumper and skid plate, ACC relocation bracket, 20" Ridgid light bar, KC Pro6 LED driving pattern lights, GearAmerica Red Uber Shackles.
Warn Zeon 10S winch, Factor 55 fairlead, Factor 55 FlatlinkE, Factor 55 HitchLink, Factor 55 Kinetic recovery rope, Factor 55 Soft Shackles.
KC 50" Pro6 LED light bar with BAMF brackets.
Mickey Thompson Baja Boss MT's 35/12.50/17 on Mickey Thompson Sidebiter II rims.
ARB twin air compressor with FasterFlate 4 tire air up/down hoses.
Midland GMRS MXT575 and Midland GMRS hand helds.
ARB differential cover, red of course.
Factory rock rails
Husky Xact-fit mats, F&R, Ford Bronco cargo area mat.
Bartact Red/Black paracord grab handles.
BRONCBUSTER tie-rod braces and steering rack bushing.
Redline hood struts.
OP
OP
- Thread starter
- #70
True for whole windshield. A windshield strip is usually not an issue.
Sponsored
OP
OP
- Thread starter
- #71
Just finished the JKS max tire clearance kit. Very happy with the kit and install. Glad to get rid of the stubs from the crash bars that mine didn't even come with, being a Wildtrak. Cleaned up the front end nicely. Staying with 35's,,,,,,for now,,
Also installed the BroncoBuster shock skids,,, nice pieces as well.
Also installed the BroncoBuster shock skids,,, nice pieces as well.
OP
OP
- Thread starter
- #72
Installed the ADD Stealth Fighter rear bumper last night. Much cleaner look than the stock one. Still have to wire up my lights to upfitter switches and while the tire is off, will make some bump stop extensions, they've never touched since swapping out wheels and tires.
OP
OP
- Thread starter
- #73
Finished!!
Last edited:
OP
OP
- Thread starter
- #74
Well,,,here we go again!!
More mods getting ready to happen.
I have some custom frame mounted rock sliders/running boards being made by Ross Fab Offroad up in Dayton Ohio, going on December 17th.
I have the Zone 3" Adventure Series lift that will go on first of the year after we get past the holidays.
Once the lift is done, I'll head to 4WP in Cincinnati and swap out my 35's to my new 37" Mickey Thompson Baja Boss MT's.
I'll be ordering the Hammer Built tailgate reinforcement to handle the extra weight of the 37's.
Looking forward to see the transformation after all this.
More mods getting ready to happen.
I have some custom frame mounted rock sliders/running boards being made by Ross Fab Offroad up in Dayton Ohio, going on December 17th.
I have the Zone 3" Adventure Series lift that will go on first of the year after we get past the holidays.
Once the lift is done, I'll head to 4WP in Cincinnati and swap out my 35's to my new 37" Mickey Thompson Baja Boss MT's.
I'll be ordering the Hammer Built tailgate reinforcement to handle the extra weight of the 37's.
Looking forward to see the transformation after all this.
Last edited:
OP
OP
- Thread starter
- #75
Added a few accessories today.
Archetype Racing BYODR rail and Bulletpoint arms and mounts.
Archetype Racing BYODR rail and Bulletpoint arms and mounts.
Sponsored
