Rigid Lights on New Bronco Raptor DOT Legal.....

[Johnkn]

I picked up a new BR late yesterday. Everything I've read suggests that the outboard Rigid lights are DOT legal fogs, and the inboard set with the covers are different and not street legal.

Last night I turned on the fogs, then the other set, and saw virtually zero difference, to the point where I didn't think the 2nd set (on the Outfitter switch) were on. I confirmed they were all on, but no pattern difference.

Looking at the lens, all (4) Rigid lights on my truck are identical, "SAE F20 DOT"

??

thanks

.

Sponsored

 

[SilverStreak02]

Yeah both sets of lights are identical and are in fact aligned the exact same from the factory. I adjusted my “off road” set higher so they were more effective.

 

[JerryC]

They're not road legal if you run both sets of fogs and the headlights together.

In some places you have to keep the second set covered while on the road.

I put amber film I got from etsy on my second set so I can chose which to use depending on conditions.

 

[Johnkn]

thanks all.

What film did you use to cover one set that matched the other front ambers?

.

 

[vrtical]

thanks all.

What film did you use to cover one set that matched the other front ambers?

.

there are standard amber Rigid lens covers.

RIGID Industries - 301933 - SR-M Series Light Cover, Amber

 

[Johnkn]

there are standard amber Rigid lens covers.

RIGID Industries - 301933 - SR-M Series Light Cover, Amber

Sorry, I'm not looking for amber covers, but tint 2 stock lights amber to match the other amber lights.... I wish there was a replacement lens...




.

 

[Johnny Mo]

They're not road legal if you run both sets of fogs and the headlights together.

In some places you have to keep the second set covered while on the road.

I put amber film I got from etsy on my second set so I can chose which to use depending on conditions.

I did the same but with the actual Rigid yellow covers.

 

[Johnny Mo]

Sorry, I'm not looking for amber covers, but tint 2 stock lights amber to match the other amber lights.... I wish there was a replacement lens...




.

There is - they make an amber cover and yellow cover

 

[Johnkn]

Thank you, ordered....


.

 

[Bschurr]

I did the same but with the actual Rigid yellow covers.

Same here but amber lenses

They do NOT match the amber running lights tho

 

[Johnny Mo]

Same here but amber lenses

They do NOT match the amber running lights tho

Yours look yellow also...they make orange/amber ones that match much better.

 

[Bschurr]

Yours look yellow also...they make orange/amber ones that match much better.

Thanks @Johnny Mo

FML - I purchased & installed the Rigid Industries 301933 which was listed as Amber on Amazon but apparently they are actually the yellow covers.

I just looked on the Rigid site and the Amber color is 301993. Time to spend some more $

I learn something new every day here on B6G!

 

[ThatWilsonGuy]

there are standard amber Rigid lens covers.

RIGID Industries - 301933 - SR-M Series Light Cover, Amber

I have these and would recommend over the film as they are so easy to use/swap.

I did find them to be more yellow than amber and I've been contemplating picking these up in hopes they match the OEM amber a little better.

https://www.addictivedesertdesigns....YMPjrlZK0MG1KctuBYZzO3lYjOkHNLnBoCLPYQAvD_BwE

 

[JerryC]

Some pics of the etsy amber film.

 

[Johnkn]

To circle back, I picked up a pair of Rigid Amber covers, 301993. While they're close, they are not an exact match for the OEM light color.

I had some leftover 'amber' film from Lamin-X I had used on (2) other non-Braptor projects and cut small pieces and adhered them inside the amber Rigid lens covers, and to my eye the color is now an EXACT match to the stock lights. The Lamin-X is thick, high quality, and protected inside the lens..

Good luck...


.

Sponsored