Sponsored

c2one

First Edition
Well-Known Member
Joined
Jan 17, 2020
Threads
3
Messages
553
Reaction score
1,559
Location
San Antonio, Texas
Vehicle(s)
2021 Ford Bronco FE
Your Bronco Model
First Edition
Clubs
 

tjnoffy

Outer Banks
Well-Known Member
First Name
Jay
Joined
Jun 25, 2021
Threads
24
Messages
791
Reaction score
1,505
Location
Maryland
Vehicle(s)
'21 Bronco OBX Sas, '05 Mustang GT Conv, 2 Harleys
Your Bronco Model
Outer Banks
Good video, although the actual routing of the driver side wiring down into the engine compartment was kind of skipped over. Probably easy enough to figure out, though.

Related topic: Anyone know if the wiring is in place from the cabin to under the hood if you didn't order the switches from the factory and want to add them later?
 
OP
OP
Middleton Motorsports

Middleton Motorsports

First Edition
Well-Known Member
Squatch Sponsor (Level 3)
First Name
MM Andrew
Joined
May 19, 2021
Threads
73
Messages
440
Reaction score
2,434
Location
Wisconsin
Website
shop.middletonmotorsports.net
Vehicle(s)
2021 First Edition Bronco
Your Bronco Model
First Edition

Sponsored

c2one

First Edition
Well-Known Member
Joined
Jan 17, 2020
Threads
3
Messages
553
Reaction score
1,559
Location
San Antonio, Texas
Vehicle(s)
2021 Ford Bronco FE
Your Bronco Model
First Edition
Clubs
 
Good video @Middleton_Sasquatch

I ran my wires slightly different:
Ford Bronco RIGID x FORD 4" pod lights full install *** DIY VIDEO *** 1630076698665

The Red line is where I ran the red wire. I removed all the clips (Yellow circles) which allowed that piece to be slightly lifted and easily tuck the wire behind.

The Blue circles is where I grounded the Black wire for each Pod - grounded separately.
The Green circle is where I spliced to two Red wires from each pod and the Violet/Green wire for Aux Switch 2 - 15w fuse.

There is also this instruction sheet as well: https://performanceparts.ford.com/download/instructionsheets/IS_M-15200K-BML_040521.PDF
 

JaxGtc

Outer Banks
Well-Known Member
Joined
Jul 14, 2020
Threads
26
Messages
2,201
Reaction score
4,649
Location
Florida
Vehicle(s)
1975 EB Sport; 2021 Outer Banks
Your Bronco Model
Outer Banks
Good video, although the actual routing of the driver side wiring down into the engine compartment was kind of skipped over. Probably easy enough to figure out, though.

Related topic: Anyone know if the wiring is in place from the cabin to under the hood if you didn't order the switches from the factory and want to add them later?
I think someone reported that the wiring was present irrespective of purchasing the switches. There was a BN video on the switches that showed what was behind the glove box.

A Built Wild Innovative Design: Ford Bronco Prewired Upfitter Switches - Bronco Nation (thebronconation.com)

Ford Bronco RIGID x FORD 4" pod lights full install *** DIY VIDEO *** Switch Wirin
 

bytheway

Badlands
Well-Known Member
First Name
Brice
Joined
Jul 6, 2020
Threads
72
Messages
1,535
Reaction score
4,426
Location
Louisville, KY
Vehicle(s)
2021 Bronco
Your Bronco Model
Badlands
Clubs
 
I found this link.
https://performanceparts.ford.com/part/M-15200K-BML

It doesn't come with all those screws and bolts pictured. Not sure why they have so many in that picture.
$395 is a great price. I thought they were supposed to be over $600. By raw lumens it exceeds the DD SS3 Max which are $500. I prefer the round look over square. The covers are an added bonus too.
 

Sponsored

SPS4

First Edition
Well-Known Member
First Name
Sean
Joined
May 31, 2020
Threads
2
Messages
259
Reaction score
725
Location
Virginia
Vehicle(s)
Audi S4
Your Bronco Model
First Edition
Clubs
 
Good video @Middleton_Sasquatch

I ran my wires slightly different:
Ford Bronco RIGID x FORD 4" pod lights full install *** DIY VIDEO *** Switch Wirin

The Red line is where I ran the red wire. I removed all the clips (Yellow circles) which allowed that piece to be slightly lifted and easily tuck the wire behind.

The Blue circles is where I grounded the Black wire for each Pod - grounded separately.
The Green circle is where I spliced to two Red wires from each pod and the Violet/Green wire for Aux Switch 2 - 15w fuse.

There is also this instruction sheet as well: https://performanceparts.ford.com/download/instructionsheets/IS_M-15200K-BML_040521.PDF
Did you wire the backlight separately from the drive light?
 

c2one

First Edition
Well-Known Member
Joined
Jan 17, 2020
Threads
3
Messages
553
Reaction score
1,559
Location
San Antonio, Texas
Vehicle(s)
2021 Ford Bronco FE
Your Bronco Model
First Edition
Clubs
 
Did you wire the backlight separately from the drive light?
No. I decided not to wire the back light for three reasons;
I didnā€™t want to use another switch;
I didnā€™t have extra wire on me at the time and;
I feel like I wouldnā€™t use the back light unless I had several of these mounted together in a row.
 

TK421

Outer Banks
Active Member
First Name
TK
Joined
Aug 26, 2021
Threads
7
Messages
31
Reaction score
14
Location
Chicago
Vehicle(s)
2021 Bronco
Your Bronco Model
Outer Banks
Super cool. If you don't have the pre-wired swithes from the factory are there mods are there kits to add the auxiliary switches to match the factory?
 
OP
OP
Middleton Motorsports

Middleton Motorsports

First Edition
Well-Known Member
Squatch Sponsor (Level 3)
First Name
MM Andrew
Joined
May 19, 2021
Threads
73
Messages
440
Reaction score
2,434
Location
Wisconsin
Website
shop.middletonmotorsports.net
Vehicle(s)
2021 First Edition Bronco
Your Bronco Model
First Edition

itbesandrodoe

Big Bend
Well-Known Member
First Name
Alessandro
Joined
Jul 20, 2021
Threads
22
Messages
377
Reaction score
737
Location
PA
Vehicle(s)
2016 Fiesta ST
Your Bronco Model
Big Bend
Clubs
 
can this be done without aux switches?
Sponsored

 
 


Top