- Thread starter
- #1
Wanted to show the mod I made to the RC High Mount sensor holders to fit the Apex Badland 12000. Started puting this package together today:
Mountains2Metal camera relocation
RC High Mount Winch solution
Apex Badland 12000 Winch
Like many have shared, the sensor holder is too long for larger winches keeping the mounting holes from aligning. I cut the sensor holder at the center of the grove on the top flange. I left the bottom one alone. Then, I took the foam retainer spacer and put it on the back of the sensor itself. After that, some electrical tape was wrapped around it to help hold it together. This site right up against the winch and it does not budge.
Very happy with how this turned out. Shout out to Brian @ Northwest Bronco for the videos. They helped a lot!
Mountains2Metal camera relocation
RC High Mount Winch solution
Apex Badland 12000 Winch
Like many have shared, the sensor holder is too long for larger winches keeping the mounting holes from aligning. I cut the sensor holder at the center of the grove on the top flange. I left the bottom one alone. Then, I took the foam retainer spacer and put it on the back of the sensor itself. After that, some electrical tape was wrapped around it to help hold it together. This site right up against the winch and it does not budge.
Very happy with how this turned out. Shout out to Brian @ Northwest Bronco for the videos. They helped a lot!
Sponsored