- First Name
- Michael
- Joined
- May 12, 2021
- Threads
- 3
- Messages
- 17
- Reaction score
- 6
- Location
- Clearwater
- Vehicle(s)
- Jeep Grand Cherokee
- Your Bronco Model
- Big Bend
- Thread starter
- #1
Has anyone installed these yet?
Sponsored
can you post a pic of your wiring when you’re done? Appreciate itJust got them yesterday I have them loosely mounted up but had to pull off. I plan on gettin them done by tomorrow. They seem like good quality lights and they aren’t $1000. Lol
Yes I will. I did contact rough country because the instructions were 100% clear. They say you need to keep all Relays that are on the harness. Well there are none. So they confirmed these lights don’t need relays.can you post a pic of your wiring when you’re done? Appreciate it
The kit I bought was the DRLs. I don’t mind 2 switches, I’d get both levels of lighting if I wired to 2 switches?Yes I will. I did contact rough country because the instructions were 100% clear. They say you need to keep all Relays that are on the harness. Well there are none. So they confirmed these lights don’t need relays.
Also each light pulls 3 amps so if you want them to all come on at once you’d have to use switch one. I may end up splitting them up between two switches and of course the drls will be on another switch.
Yes but the LEDs will wash out the drl with them both on. Did you get the amber or white drl? I just got done with the install they look great! I’ll try to get some pictures up soon.The kit I bought was the DRLs. I don’t mind 2 switches, I’d get both levels of lighting if I wired to 2 switches?
If you need just a mount for lights, check out our KR Off-Road Mounting Brackets: https://www.4x4truckleds.com/kr-off-road-triple-fog-light-brackets-for-2021-ford-bronco/Can you get just the mount?
I got white DRL.Yes but the LEDs will wash out the drl with them both on. Did you get the amber or white drl? I just got done with the install they look great! I’ll try to get some pictures up soon.
I got the ambers. Looks great with the running lights!I got white DRL.
Looking great! I just had the hidden winch installed a few weeks ago. Im going to install some performance rigid’s today. This post has me sold on their fog lights.I got the ambers. Looks great with the running lights!
so how many switches did you use total?I got the ambers. Looks great with the running lights!
Took about 2 1/2 hours. The most time consuming part honestly was adjusting the lights. The bolts are hard to get to on top so I had to keep on removing the whole assembly to make adjustments. It’s worth it though gives me the look i was going for at a fraction of the price of most of the other kits out there.Looking great! I just had the hidden winch installed a few weeks ago. Im going to install some performance rigid’s today. This post has me sold on their fog lights.
How long did it take?
I ended up using two switches. Switch one (30 amp) for the white LED. And switch 3 for the drl. The total amps for 6 lights was 18 amps so if you want them all on one you have to use switch 1 and I’m ok with it. Switch 2 should be plenty for most light bars that’s my plan for switch 2.so how many switches did you use total?
each pod to 1 switch?
white on its own switch?
amber on its own switch?
can you post a pic on what you have going on with the firewall wires?