- Thread starter
- #1
Greetings! First post on this forum and first 4WD vehicle beyond a Jeep Wrangler in 10 years.
Picking up a 2022 OBX edition tonight. Curious if there is any trimming or other mods needed to run a 2" ReadyLift kit with 315/70 17" Goodyear Territory M/T's on OEM Sasquatch wheels (17 x 8.5" w/30 offset)?
Reading through other posts it seems a spacer lift will work well on the OBX model. I've always done spring lifts on my Jeeps and have stayed away from spacer lifts. Bronco is a fully different vehicle though so trying to learn quickly here.
Vehicle will spend 90% of its time on the road w/very low key off-roading every now and again.
Thanks!
Picking up a 2022 OBX edition tonight. Curious if there is any trimming or other mods needed to run a 2" ReadyLift kit with 315/70 17" Goodyear Territory M/T's on OEM Sasquatch wheels (17 x 8.5" w/30 offset)?
Reading through other posts it seems a spacer lift will work well on the OBX model. I've always done spring lifts on my Jeeps and have stayed away from spacer lifts. Bronco is a fully different vehicle though so trying to learn quickly here.
Vehicle will spend 90% of its time on the road w/very low key off-roading every now and again.
Thanks!
Sponsored