Show us your installed wheel / tire upgrades here! (Pics)

[Victoryengineer]

22 Badlands Sas

Updated the stock set up finally to

17x9 method mr312 -12mm offset

tires
35 bf ko2s

gotta ride feels better and rides quieter I love
the way it came out and stance I was looking for.

Those look great on your rig.....well done! It's hard to go wrong with Methods

Sponsored

 

[Jhuff]

How hard was the install

The first time took most of a day, but I wasn't in a hurry. How "hard" the install is depends upon which method you use.

Dropping the LCAs (only) was pretty simple; until the very end when I was sore, tired, and trying to get them back in and torqued. I swore I'd never do it again at that point.

If I didn't have an impact gun, I would've been swearing MUCH more.

Here's a small discussion some of us had about the install, and it sums up my experience well: https://www.bronco6g.com/forum/threads/any-shortcuts-for-installing-lift-and-levelling-kits.44441/

 

[‘21OBX]

Fuel block wheels and possibly a huge mistake fuel gripper MT that took a ton of weight to balance. So seems like they might be not great tires. They are fairly quiet and ride ok for now.

 

[Jsullivan]

Looks great! What wheels are those and what tire size did you go with? Also, which step rails are those? Thanks.

Wheels are Ultra Mongoose 17x9 25 mm offset, tires are BF Goodrich 285/70r17 KO2,
The running boards are Go Rhino D1.
I had to cut down the D1's by 14" and weld them together, from the 4 door ones, they didn't have 2 door available when I installed these. I believe they do now.
I used the OEM hub covers from my Base steelies and drilled and tapped the rims so the caps would work.
Thanks,

 

[StephenSJ]

Wheels are Ultra Mongoose 17x9 25 mm offset, tires are BF Goodrich 285/70r17 KO2,
The running boards are Go Rhino D1.
I had to cut down the D1's by 14" and weld them together, from the 4 door ones, they didn't have 2 door available when I installed these. I believe they do now.
I used the OEM hub covers from my Base steelies and drilled and tapped the rims so the caps would work.
Thanks,

Got it. It all comes together perfectly. Nice job! I will have to look into those D1s for a 2-door. Thank you.

 

[Jsullivan]

Got it. It all comes together perfectly. Nice job! I will have to look into those D1s for a 2-door. Thank you.

I checked and GoRhino has a 57" D1 running board available.
That is for the 2 Door. Mine were cut to 60" long.
Part #D10057T
The brackets I ordered were #D64129TK (for 4 door-I don't see a 2 door kit yet)
You'll have 2 extra brackets and some nuts and bolts but they bolt up great.

 

[StephenSJ]

I checked and GoRhino has a 57" D1 running board available.
That is for the 2 Door. Mine were cut to 60" long.
Part #D10057T
The brackets I ordered were #D64129TK (for 4 door-I don't see a 2 door kit yet)
You'll have 2 extra brackets and some nuts and bolts but they bolt up great.

Cool, thank you for the info! More accessory items to pile up as I patiently await my Bronco (wife not happy, lol!).

 

[Baseaf]

16x8 0 Offset Vision Turbine on 285/75/16 Nitto Terra Grapplers.

 

[TXArea51]

The first time took most of a day, but I wasn't in a hurry. How "hard" the install is depends upon which method you use.

Dropping the LCAs (only) was pretty simple; until the very end when I was sore, tired, and trying to get them back in and torqued. I swore I'd never do it again at that point.

If I didn't have an impact gun, I would've been swearing MUCH more.

Here's a small discussion some of us had about the install, and it sums up my experience well: https://www.bronco6g.com/forum/threads/any-shortcuts-for-installing-lift-and-levelling-kits.44441/

I was going to attempt it but, I gave in and going to have my local shop do it. I’ve done plenty of lifts on Tacomas and 4Runners. Just don’t wanted to risk it.

 

[craq5]

37" x 12.5R17, Yokohama X-AT Geolandar with 17 Fifteen52 Range HD Black

 

[Demosouthpaw]

Ah man yeah sorry, wish I could have saved you $$. In my defense....I made this

https://www.bronco6g.com/forum/threads/big-bend-wheels-on-315-70-17.41732/

Back in April lol.


More power to you though those SAS fenders look good with the right tire under there. I presonally really like the BB wheels/color so I didn't want to part with them.

 

[WpBenGman]

285/75/18 Nitto Ridge Grapplers on stock OBX wheels. 2inch RC lift.

Just letting you know, you inspired us! We did the same thing but went with Cooper all terrains since this will mainly be a daily driver. Thank you so much!

 

[CarolinaPandaBronco]

Just letting you know, you inspired us! We did the same thing but went with Cooper all terrains since this will mainly be a daily driver. Thank you so much!

Looks amazing! Glad the post was helpful!

 

[CarolinaPandaBronco]

Looks amazing! Glad the post was helpful!

Also I like the stacked fender emblems. I stacked my tailgate and went just retro on the fender… View attachment 331428

Sponsored