Fuel Vapor 20x9, 20mm offset., Matte Black DDT and Yokohama Geolander MT 35/12.50
Sponsored
Fuel Vapor 20x9, 20mm offset., Matte Black DDT and Yokohama Geolander MT 35/12.50
Did you install any leveling or lift, or is it stock suspension? Any rubbing? Thanks!Fuel Vapor 20x9, 20mm offset., Matte Black DDT and Yokohama Geolander MT 35/12.50
It does have a 2" Rough Country puck lift, but we drove it for over a week before the lift and the wheels/tires fit without rubbing. We did have to remove the crash bars, but we figured that anyway.Did you install any leveling or lift, or is it stock suspension? Any rubbing? Thanks!
Good info, thanks! Did you remove the crash bars before the lift? Or would they have been fine once the 2” spacers were installed? Would love to see more pics with the lift.It does have a 2" Rough Country puck lift, but we drove it for over a week before the lift and the wheels/tires fit without rubbing. We did have to remove the crash bars, but we figured that anyway.
thank you! Purchased from Discount tire in Colorado Springs. Great service and prices.Thanks for sharing photos with the group, that is a awesome looking setup!
Loving the all black with the wheel and tire package you are running.
LOVE the Blacked out look - sinister.......haha! Nice wheel choice too! I almost did those in the grey colorFifteeen52 Traverse HD, Asphalt Black
17x8.5, 0 offset
Bf Goodrich KO2s 315/70 R17
That's so great to hear, thank you for the support!thank you! Purchased from Discount tire in Colorado Springs. Great service and prices.
I have the front tow hooks removed, in the process of building a winch mount, looking for some grill guard ideas too, hit 1 deer so far and 2 near miss, no damage, unbelievable, I have a lot of good to say about that modular bumper.
What size wheel and tire? Picking my OBX up in a few weeks.Removed the crash bars to fit the wheels/tires. They rubbed the crash bars pretty good. We just left them out after they lifted it. I'm sure they probably still rub. It is very subtle, it actually don't even look lifted, unless you saw it with just the wheels/tires. It looked lowered because the wheel wells were full.
Stock
..................What's the exact size of your tire. Looks fabulous...
3” Zone lift, 35x11.5x17 Toyo A/T3 on optional Badland wheels
People are getting their Broncos! Let the mods begin! Show us your rig with completed wheel/tire upgrades and specs (wheel/tire size and offset).
1st I’ve seen for customer builds is @Jb7 with 285/70r17 KO2s on stock big bend.
@BigBronco1 BD w/ +30 RTRs 33 KO2s
Check out the flush fender fit w/ this offset!
OB w/ Cooper AT3s 275/75/r18
Base w/ stock wheels painted black.
Sick non-sas Base from facebook.
16x8 0mm offset 285/75r16
@Appzilla Toyo AT3s 285/70r17
Base w/ 35s on 20” Fuel Assaults
BD @ Kanata Ford specs unknown
@Area51outerbanks rig
35 x 12.5 x 18 bfgoodrich ko2's on black rhino shredder Wheels 18 x 9.5 with +12mm offset and Zone 2” spacer lift.
lift w/ stock tires.
@Pbloom49 another +30 RTR w/ 285s
@88to21bronco w/ 285 Toyo AT3s
@CnyBDBronco w/ 33/12.5/r20s on +1mm offset 20” wheels.
Facebook grab
285/75r16 Milestar Patagonia M/Ts stuffed on the 7” wide steelies!
Found on facebook: 2.5" 4WP Lift
35x12.50R17 Mickey Thompson Baja Boss A/T
17x8.5 M310 Method Wheels (+35?)
Pandaworks R&D rig
Bronze Kansei wheels (+0?)with stock tires
edkenleyford Demo Bronco w/ 35” Nitto Trail Grapplers on Fuel wheels
Facebook- Ken Weeks
4WP 2” spacer lift w/ 35” MT Baja Boss on Method Con6 (+0) wheels
Broncobattalionusa instagram another look at some bronze wheels / BFGs
Bronco6x facebook 35” Falken Wildpeak ATs w/ 18” wheels (+0)
Nice powdercoated BD wheels!
@Thomas1984 fifteen52 traverse (+0) w/ 35” nitto ridge grapplers.
Facebook Bronco6x
Base w/ 2” 4wp +35mm wheels 35”x12.5r17 Mickey Thompsons
Bronco6x
*I’ll try to add more as they show up.