- First Name
- Damion
- Joined
- Nov 7, 2022
- Threads
- 4
- Messages
- 21
- Reaction score
- 120
- Location
- West Michigan
- Vehicle(s)
- 21 Bronco 6G
- Your Bronco Model
- Black Diamond
- Thread starter
- #1
Started out with a few simple mods...low bull bar, Rough Country 3" pods (6 for the fog light bay (4 spot, 2 floods), 4 for the bull bar (4 Spot), and 2 Pillar Floods. Then went a little bigger. Accutune Stage 3, 3.5 inch lift with Fox 2.5 shocks and coil overs, Icon Upper Control arms, Icon Rear Sway Bar, Icon Upper and Lower Rear links (which I still have to out on. In order to access the passenger side upper rear link, you need to drop the gas tank and remove the vent hose. I didn't have the correct size sleeve tool to remove the vent hose, so the stock upper and lower rear links stay on for now, until I have time to revisit.) Removed the front and rear crash bars from the front end and installed Alloy Ion 171 Bullet Hole Rims with Mickey Thompson 35x12.5x17 Baja Boss Hybrid AT/MT Tires. Due to extra weight on spare, I added a Rough Country tailgate re-enforcement bracket, 3rd brake light extension and re-location bracket. I Had Extreme Car Audio install an Alpine amp to boost the audio and bypass the lowblock that Ford puts on the rear speaker pods. Upgraded to Mabbitt 6.5" Speaker Pods and installer Kicker 6.5" in the front kick panels, rear pods, and tweeters in the dash-with a bass blocker. All speakers ended up getting sound mats. Added a Kicker Powered Sub in the rear cargo area and bolted to the Molle Panels I installed to deter theft when the tops down.
Sponsored
Last edited:
