- First Name
- Ben
- Joined
- Apr 22, 2021
- Threads
- 30
- Messages
- 463
- Reaction score
- 1,004
- Location
- Las Vegas, NV
- Vehicle(s)
- 2022 2dr Bronco
- Your Bronco Model
- Big Bend
- Thread starter
- #1
Everyone, meet sea biscuit.
J/k, I'm not naming my Bronco.
But if I did I would call her Agatha.
EDIT:
Reserved 7/13/20 @ 820PM PST.
Confirmed as a MT SAS Badlands 3/1/20, then told my22 (no), converted to base MT, mod bumper, switches, and floor liners (sort of flimsy/notweathertechs/~$150 is just fair) on 3/18/20. Production initially week of 6/28 then late bump to 7/19. Found window sticker 2 weeks early 7/5 or so. In Production email 7/19, built email 7/20, shipped email 7/21, estimated delivery via rail 8/7-8/13.
The bronze wheels look a bit much in full sun but I'm pretty happy with the combo from most angles. Also forgot to tell dealer to hold the tire dressing
Also feel like I nailed the poke I was looking for with +35 offset Method wheels on 285/70r17 - tread all but contained with just the sidewall swells pushing out.
More pics suitable pics and plenty of tinkering ahead. Looking like ARB twin compressor will be first big spend, followed by rear locker sometime after.
For now all I can say is the fixed forward tilt headrests are a grand failure (?!?!?!) May soon be trying to keep the chrome on the pins intact while cranking on them in the vise!
I truly feel for y'all in purgatory or plain in the dark! But we're one more closer to your deliveries now!
J/k, I'm not naming my Bronco.
But if I did I would call her Agatha.
EDIT:
Reserved 7/13/20 @ 820PM PST.
Confirmed as a MT SAS Badlands 3/1/20, then told my22 (no), converted to base MT, mod bumper, switches, and floor liners (sort of flimsy/notweathertechs/~$150 is just fair) on 3/18/20. Production initially week of 6/28 then late bump to 7/19. Found window sticker 2 weeks early 7/5 or so. In Production email 7/19, built email 7/20, shipped email 7/21, estimated delivery via rail 8/7-8/13.
The bronze wheels look a bit much in full sun but I'm pretty happy with the combo from most angles. Also forgot to tell dealer to hold the tire dressing
Also feel like I nailed the poke I was looking for with +35 offset Method wheels on 285/70r17 - tread all but contained with just the sidewall swells pushing out.
More pics suitable pics and plenty of tinkering ahead. Looking like ARB twin compressor will be first big spend, followed by rear locker sometime after.
For now all I can say is the fixed forward tilt headrests are a grand failure (?!?!?!) May soon be trying to keep the chrome on the pins intact while cranking on them in the vise!
I truly feel for y'all in purgatory or plain in the dark! But we're one more closer to your deliveries now!
Sponsored
Last edited: