TrailRax Modular Roof Rack For Your Bronco

[TrailRax]

@TrailRax Will there be a possibility to attach other lights to the wind deflector? Or we are limited to the heretic lights only? Still can't decide which route should I go.

While the cut out was specifically designed to the Heretic bar for the most benefits other than just a high performance light, you will be able to mount similar lights. We just cannot confirm their fitment. We know for sure that the heretic light will be your best option if you want an easy install.

Sponsored

 

[JohnZi]

While the cut out was specifically designed to the Heretic bar for the most benefits other than just a high performance light, you will be able to mount similar lights. We just cannot confirm their fitment. We know for sure that the heretic light will be your best option if you want an easy install.

what about more old school looking lights like this?
https://www.rtrvehicles.com/products/rtr-light-bar-w-project-x-ff-70-lights-21-bronco-all

 

[TrailRax]

what about more old school looking lights like this?
https://www.rtrvehicles.com/products/rtr-light-bar-w-project-x-ff-70-lights-21-bronco-all

That will not fit. Those RTR lights require mounting to the windshield studs. RTR does an awesome job but the two products conflict by using the same mounting points.

 

[2ndgenirish]

I am interested in a Trailrax for a 4-door Badlands (not yet delivered) and with a RTT. What can you say about compatibility with RTT's, such as a Smittybilt or the Silverwing (sold by Costco)?
Thanks.

 

[TrailRax]

I am interested in a Trailrax for a 4-door Badlands (not yet delivered) and with a RTT. What can you say about compatibility with RTT's, such as a Smittybilt or the Silverwing (sold by Costco)?
Thanks.

Keep in mind Ford's Weight load capacities per your manual for your vehicle, but we know the rack can take on that weight with no problem.

 

[Tilzbow]

Will the Pak Rax hold two 3 gallon Rotopax side by side on each side of the 2-door Bronco? Total would be 12 gallons with 6 gallons per side. I’m asking because I already have the gas cans and don’t want to spend more on new cans.

Dimensions

16 L x 15 W x 4 1/2 H

 

[TrailRax]

Will the Pak Rax hold two 3 gallon Rotopax side by side on each side of the 2-door Bronco? Total would be 12 gallons with 6 gallons per side. I’m asking because I already have the gas cans and don’t want to spend more on new cans.

Dimensions

16 L x 15 W x 4 1/2 H

You should have no problem, keep in mind the mounting plate was not entirely designed around that setup, so some jimmy rigging on our mounting plate may be required. Load-wise, you should be fine.

 

[We_Love_Tacos]

Just. Got. Shipping. Notification.

 

[TrailRax]

Just. Got. Shipping. Notification.

We love when a plan goes together.

 

[We_Love_Tacos]

We love when a plan goes together.

I’m headed to Big Bend next weekend and was hoping for this, as you are well aware. I could kiss you…..

 

[TrailRax]

I’m headed to Big Bend next weekend and was hoping for this, as you are well aware. I could kiss you…..

The first 15-20 orders within our preorder will be going out today and we are hoping to do that every day this week to catch up.

Awesome it worked out for you. Thank you for being one of the first Preorders.

 

[Tilzbow]

You should have no problem, keep in mind the mounting plate was not entirely designed around that setup, so some jimmy rigging on our mounting plate may be required. Load-wise, you should be fine.

Thanks although I was hoping for a more definitive answer before dropping $1,700 and discarding my OEM rack…. In any case by “jimmy rigging“ do you mean drilling holes or something different?

 

[TrailRax]

Thanks although I was hoping for a more definitive answer before dropping $1,700 and discarding my OEM rack…. In any case by “jimmy rigging“ do you mean drilling holes or something different?

Possibly, we have never done 2x 3 gallons mounted side by side to one another. It should work but we cannot say it will fall together perfectly like a 4 gallon would. So yes you may have to drill holes into the mounting plate.

 

[We_Love_Tacos]

The first 15-20 orders within our preorder will be going out today and we are hoping to do that every day this week to catch up.

Awesome it worked out for you. Thank you for being one of the first Preorders.

I imagine I was very close to the first actual order if not the first. I was on it and it may pay off. Thanks again. Stand by for pics and videos. Now to scramble getting the rest now that it’s coming.

 

[TrailRax]

I imagine I was very close to the first actual order if not the first. I was on it and it may pay off. Thanks again. Stand by for pics and videos. Now to scramble getting the rest now that it’s coming.

The Pre-trip/event scramble is something we are becoming professionals at!

Sponsored