US Mag Indy Slotted Wheels - Need Member Help to Make it Happen!

[Silver-Bolt]

What am I missing? They already make them in the correct lug pattern. The offset isn't ideal.

Sponsored

 

[GToddC5]

What am I missing? They already make them in the correct lug pattern. The offset isn't ideal.

Ok, a search of the image revealed that the Bronco belongs to @Alfie623 and he shared the following info:

" Indy 101’s in 17x9, tires are BFG KO2’s in 35x12.5, Badlands Sasquatch suspension with Zone Off-road 1” leveling kit. "

So my guess is that they custom drilled out a blank 17x9 which has an offset of -37mm, and that's why the poke is so severe past the Squatch flares. The contact at US Mags gave me that option, but I thought the offset was too much. These would be 4" past my current stock Badlands wheels/tires, and it's this far past Squatch:

 

[broadicustomworks]

 

[Silver-Bolt]

Ok, a search of the image revealed that the Bronco belongs to @Alfie623 and he shared the following info:

" Indy 101’s in 17x9, tires are BFG KO2’s in 35x12.5, Badlands Sasquatch suspension with Zone Off-road 1” leveling kit. "

So my guess is that they custom drilled out a blank 17x9 which has an offset of -37mm, and that's why the poke is so severe past the Squatch flares. The contact at US Mags gave me that option, but I thought the offset was too much. These would be 4" past my current stock Badlands wheels/tires, and it's this far past Squatch:

If I remember correct from the original post, they were not re-drilled and had an offset of -12mm.

 

[GToddC5]

If I remember correct from the original post, they were not re-drilled and had an offset of -12mm.

Nothing about being re-drilled. US Mag can drill the Indy blanks for their available size of 17x9 w/ -37mm offset (at least that's what they told me directly). You may be thinking of American Racing Ansen wheels, available as 17x9 w/ -12mm offset and 6x139.7 (can't find any in stock anywhere), which I'm looking into as well. They would be 1" less poke compared to the Indys, which I can live with.

 

[peterh]

I sent them a request as well - would really like to see these in a 17x8 with a +18 which i think would be minimal poke with the standard flares - the 0 offset already available works for the sas flares.

Here's what they told me:
"No, the U101 can not be built with a custom offset, but US547 can."
This is the 547 - looks exactly like the Indy101 to me?!

 

[lapazleo]

Potentially big market here US wheels. Pay attention.

 

[lapazleo]

I sent them a request as well - would really like to see these in a 17x8 with a +18 which i think would be minimal poke with the standard flares - the 0 offset already available works for the sas flares.

Yep that's the nice about quick change flares on the Bronco 6g.

 

[peterh]

yes but i really don't like the sas flares at all - too wide

 

[GToddC5]

I sent them a request as well - would really like to see these in a 17x8 with a +18 which i think would be minimal poke with the standard flares - the 0 offset already available works for the sas flares.

Here's what they told me:
"No, the U101 can not be built with a custom offset, but US547 can."
This is the 547 - looks exactly like the Indy101 to me?!

Already looked into that. That wheel is their 2 piece forged custom option, and would run over 6k for a set of 5. Yikes.

 

[peterh]

alrighty then, that's kinda steep - the Augment Wheels were pricey but less than that!

 

[GToddC5]

Pics, sizes and specs?

 

[peterh]

I'd be interested in seeing what specs and wheel you are looking at with the Team 3

 

[GToddC5]

I'd be interested in seeing what specs and wheel you are looking at with the Team 3

After a search:

These 5 Windows are nice, but not available in 16" or 17":
https://www.etmags.com/five_window.html

These Fuelers are stupid wide with bad offsets:
https://www.etmags.com/fueler.html

None of the other designs look right, and all of these are likely race wheels not designed for offroad.

Sponsored