What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Jack D]

I do the same but don’t want my sticks on the console. I try and diagonally wedge the sticks between the driver’s seat and the rear “passenger” roll bar. You?

I’m still working that out- last week I put the handles between the rear seats and the blades where the front passenger’s legs would go, to avoid leaving stick tape marks everywhere.
I guess we need someone to produce Bronco hockey stick bags?

Sponsored

 

[CrystalRedTintCoat]

I’m still working that out- last week I put the handles between the rear seats and the blades where the front passenger’s legs would go, to avoid leaving stick tape marks everywhere.
I guess we need someone to produce Bronco hockey stick bags?

Great idea (Bronco stick bags). I’m In! Ha.
Maybe it‘s an open loop on the passenger side the butt end of the sticks can pass through with the blades hung over the right-rear seat.
I have a bag of pucks and cones (I also coach) back there too and it all just fits.

 

[steverollin]

Did you get the amber DRL option? It looks like it takes a 2nd aux switch, yes?
Your plastI dip is not horrible! Stuff is hard work with. I think you can get black bronco’s on amazon and remove the stock bronco with dental floss. FWIW.

I did not get the amber option. And thank you. I’m going to just buy a black one and replace like you suggest. It was worth a try since I had a can laying around.

 

[Mdsuits]

Finished up my rear bumper…couldn’t stand how the factory bumper stuck way out past my fiberglass fenders.

 

[CrystalRedTintCoat]

ZRoadz Rock Sliders!

 

[CrystalRedTintCoat]

Bartact's Accessory Door Bags

BIG pocket. Added sunglass case. Attach house keys. Love the MOLLE. Retains the original mesh pocket too.

 

[WeirdGuy]

Today i installed a black horse to re-place the chrome horse.

Looks good. Where'd you get the matte black version? I only ever see gloss black when looking for one.

 

[cgv]

Purchased some eibach coilovers!

Was planning to run a small spacer lift until more long travel options hit the market, but the eibach's were too good of a deal to pass up and are a much better solution for running 37s and off roading while I wait for more options.

Best part is they shipped same day and will be here on Thursday!

 

[OverDavidLand]

I'm more curious about the grass strips in the driveway.

Astroturf to fill and brake up thousands of square feet of concrete pads means less cracking. Or something. I don't know, the house came with it.

 

[Aviator]

Powder Coated my Trim Rings. (And tow hooks)

 

[CUPRA]

I added a 20" Light Bar to the front of the Bronco, in the gap between the modular bumper and the top of the bull bar. Nice sleek finish, doesn't affect airflow and offers up a lot more lighting, even from such a small light bar. I wired it up to the AUX switches too, for a seamless integration.

 

[Cat]

I added a 20" Light Bar to the front of the Bronco, in the gap between the modular bumper and the top of the bull bar. Nice sleek finish, doesn't affect airflow and offers up a lot more lighting, even from such a small light bar. I wired it up to the AUX switches too, for a seamless integration.

Very nice. Thank you for the video...nicely done.

 

[Dickzip]

I have a Everglades, so the ARB under hood mounts that are available won’t work. Not exactly the best place for compressor anyway (hot dusty wet?).

I hate the dumb nets on the doors, so I think DV8 makes the nicest molle panels that replace the nets, they holds two small bottles With room to spare and i cant feel it on my leg.

RTR spare tire carrier with the hi-lift mount and accessory plate. I made the mount for the Tredpros and Krazybeaver shovel. They need to get rollin on mount Options. Not sure who would want a jerry can since there are better choices Now (I.e rotopax).

Warn elite front and rear bumpers.
Warn 10K winch with synthetic rope, recovery gear Don’t leave home without it.

Storage is limited... so these Chinese molle panels are cheap and actually are Pretty nice.
No sense paying almost 200 each

Needed extra light in the cargo area, used a rock light wired to the existing cargo lamp.

who has a OEM tow hook/recovery point laying around See photo, I could use one...

 

[NoloBronco]

I have a Everglades, so the ARB under hood mounts that are available won’t work. Not exactly the best place for compressor anyway (hot dusty wet?).

I hate the dumb nets on the doors, so I think DV8 makes the nicest molle panels that replace the nets, they holds two small bottles With room to spare and i cant feel it on my leg.

RTR spare tire carrier with the hi-lift mount and accessory plate. I made the mount for the Tredpros and Krazybeaver shovel. They need to get rollin on mount Options. Not sure who would want a jerry can since there are better choices Now (I.e rotopax).

Warn elite front and rear bumpers.
Warn 10K winch with synthetic rope, recovery gear Don’t leave home without it.

Storage is limited... so these Chinese molle panels are cheap and actually are Pretty nice.
No sense paying almost 200 each

Needed extra light in the cargo area, used a rock light wired to the existing cargo lamp.

who has a OEM tow hook/recovery point laying around See photo, I could use one...

Do you care to post more pics of the front bumper? All angles please.

 

[Dickzip]

Here u go

Sponsored