Wheel OffSet of Bronco Wildtrak?

[dgorsett]

I think this is wrong and it is 30. The offset for the Badlands optional wheels (the non-squatch ones) is 55.

In the same thread @LEGEND told us the squatch ones were 30:

Yep, deleted my post 'cause I had my head up my a**. Thanks for LEGEND's original info

Sponsored

 

[Felix808]

We had actual measurements and images of the numbers stamped into the wheels at the factory.

Wasn't it 55 for the standard wheels and 30 for the Squatch?

::EDIT::

Well that just sucks, Made in China & die cast not forged as previously stated. Thanks for the post.

 

[ZackDanger]

Well that just sucks, Made in China & die cast not forged as previously stated. Thanks for the post.

Lots of discussion on this in other threads... I would seek those out before I make any assumptions or come to any conclusions about what the production product will be...

(Though I think it's safe to assume the offset and sizing is dialed in by the point those photos were taken)

 

[Felix808]

Lots of discussion on this in other threads... I would seek those out before I make any assumptions or come to any conclusions about what the production product will be...

(Though I think it's safe to assume the offset and sizing is dialed in by the point those photos were taken)

Will do

 

[oneshot]

+30 offset for sas

TKX

 

[Dads_bronze_bronco]

Yep, deleted my post 'cause I had my head up my a**. Thanks for LEGEND's original info

No worries - I spent 10 minutes double checking that less offset means sticking out more - and then finding the original thread to make sure!

 

[Felix808]

No worries - I spent 10 minutes double checking that less offset means sticking out more - and then finding the original thread to make sure!

Actually it's less back spacing makes them stick out more. Offset is just that, offset from the centerline of the wheel. There is both positive & negative offsets, but the 2 relate to each other.

 

[Dads_bronze_bronco]

Pretty much Badlands beadlock ready vs Sasquatch beadlock ready.

 

[Raptor.Tremor.Bronco]

I'd rather know if they are forged like the raptor beadlock wheels

 

[edgeflyer]

Did you now that the Toyota trucks and the bronco share the same bolt pattern? So the wheels that you can buy now were meant to fit Toyotas and NOT the Bronco.

Go on right ahead and buy toyota wheels for your bronco.

and this >> Some have said they have contacted wheel Dealers >> Those wheel dealers never told them that the wheel were meant for Toyota trucks and it just happens to fit he Bronco. Toyota and Bronco do NOT share the same hub bore.

I purchased wheels for my Bronco and are 100% guaranteed to fit. I know they are not "toyota" wheels for 2 reasons. One - they are not listed as toyota wheels and 2 - I would never put a Toyota thing on anything I own.

 

[Raptor911]

May I ask what wheels you purchased?

I purchased wheels for my Bronco and are 100% guaranteed to fit. I know they are not "toyota" wheels for 2 reasons. One - they are not listed as toyota wheels and 2 - I would never put a Toyota thing on anything I own.

 

[ZackDanger]

May I ask what wheels you purchased?

But he said he would never put Toyota wheels on anything he owns... so therefor, they couldn’t possibly be Toyota wheels.

Clean out your ears, man.

 

[Raptor911]

LoL!.

But he said he would never put Toyota wheels on anything he owns... so therefor, they couldn’t possibly be Toyota wheels.

Clean out your ears, man.

 

[edgeflyer]

May I ask what wheels you purchased?

Ha, I'm keeping that secret now to hopefully keep my Bronco as unique as possible, but I'll tell you specs if you want. 17X9 6x139.7 -12 offset. Hub centric rings are available for the "toyota size". Honestly, when I bought them, I thought I'd sit on the for 7-8 months, not a year and change.

Sponsored