Which 4 tire hose system to match with arb compressor?

[SillyPosition]

Gםא my arb twin compressor installed in my engine bay recently, and Im wondering which air system should I go with?
I thought about thor's system: https://thorslightningairsystems.com/products/thors-lightning-rapid-4-tire-air-system

Is there anything better/cheaper that will get the job done good, easily, comes in a tiny bag etc?
Amazon is always a better option for worldwide shipping.

Also, Do I need to get any sort of adapter to have it connected to the ARB output port? It doesnt seem like a regular 1/4" npt port

Sponsored

 

[Keerplunk]

Not much cheaper but it was the method I had for my Jeep, I ran a power tank with it and took more time to hook up than to fill up! Sold it with my Jeep and starting over I will buy the exact same thing.

https://morrflate.com/shop/morrflate-multi-tire-air-kits/morrflate-quad-4-tire-air-kit/

 

[MJ12]

I run the indeflate 4

 

[Fly2Win]

I went with the Desert Armor setup:

https://desertarmorshop.com/product/baller-ez-air-tire-infalte-deflate-system/

And the ARB air hose coupling:

https://www.northridge4x4.com/part/0740111-arb-air-hose-coupling-black-coated-coupler

The Desert Armor bag is kinda big so I plan to get a smaller tool bag for the hoses.

 

[ScLeCo]

I went with these. I actually went with the make your own kit, but this is the end result.
https://www.tireflate.com/product-page/4-tire-inflate-deflate-system

 

[615_Bronco]

Another vote for the morrflate system

 

[TEAMSLO]

I use the ezflate coil 4 hose setup. Milwaukee packout fits it and a couple of other small tire related items perfectly.

Also definitely great customer service, a friend had a failure and the company backed up their product and sent a new one.

 

[Mr Bacon Jr]

Morrflate + PowerTank for the win.

 

[Merc4x4]

I went with MORRFlate Stuby because you can disconnect all the hoses form the manifold.
https://morrflate.com/product-categ...late-stubby-modular-tire-inflation-deflation/

 

[Aman]

I went with MORRFlate Stuby because you can disconnect all the hoses form the manifold.
https://morrflate.com/product-categ...late-stubby-modular-tire-inflation-deflation/

Agreed, the Stubby works really well. Being able to disconnect the hoses makes it significantly easier to manage.

 

[4x4TruckLEDs.com]

Gםא my arb twin compressor installed in my engine bay recently, and Im wondering which air system should I go with?
I thought about thor's system: https://thorslightningairsystems.com/products/thors-lightning-rapid-4-tire-air-system

Is there anything better/cheaper that will get the job done good, easily, comes in a tiny bag etc?
Amazon is always a better option for worldwide shipping.

Also, Do I need to get any sort of adapter to have it connected to the ARB output port? It doesnt seem like a regular 1/4" npt port

Go with the MORRFlate system. It's our most popular seller and it's what we use:

https://www.4x4truckleds.com/morrflate-quad-4-tires-up-to-125-wheelbase-1/

I'd also recommend the extension hose. The extension hose plugs into the compressor and then into the MORRFlate system. This helps keep the manifold on the MORRFlate cool to the touch:

https://www.4x4truckleds.com/morrflate-7-5ft-extension-for-arb-compressors/

It plugs right into the ARB Coupler, which is a standard fitting.

Also, if you want a good set of tire deflators, go with the Staun tire deflators: https://www.4x4truckleds.com/staun-tire-deflator-4-pack-standard-duty-6-30-psi/

 

[j_marinelli]

I went the DIY route in the video below.


Got all the parts off Amazon (except the stuff I already had laying around the shop)

 

[Bradley Thornton]

See post 68 it will give a a full parts list. On the DIY
https://www.bronco6g.com/forum/thre...ch-badlands-no-lift-build-thread.26479/page-5

 

[SillyPosition]

Go with the MORRFlate system. It's our most popular seller and it's what we use:

https://www.4x4truckleds.com/morrflate-quad-4-tires-up-to-125-wheelbase-1/

I'd also recommend the extension hose. The extension hose plugs into the compressor and then into the MORRFlate system. This helps keep the manifold on the MORRFlate cool to the touch:

https://www.4x4truckleds.com/morrflate-7-5ft-extension-for-arb-compressors/

It plugs right into the ARB Coupler, which is a standard fitting.

Also, if you want a good set of tire deflators, go with the Staun tire deflators: https://www.4x4truckleds.com/staun-tire-deflator-4-pack-standard-duty-6-30-psi/

Thanks. I wish I could make an order from your website. I tried. But there is no way to ship to parcel forwarders or internationally.

 

[4x4TruckLEDs.com]

Thanks. I wish I could make an order from your website. I tried. But there is no way to ship to parcel forwarders or internationally.

Yeah sorry about that. We don't ship outside the USA or Canada and due to fraud in the past we don't ship to freight forwarders. It's actually burred in the fine print of our payment processors that shipments to freight forwarders are NOT INCLUDED in their dispute refunds. So we'd lose the case 100% of the time if it goes to a freight forwarder. It's why you might find it harder and harder to find a retailer to ship to you these days.

Sponsored