ThatGuyatFord

Big Bend
Well-Known Member
First Name
Connor
Joined
Aug 27, 2020
Messages
78
Reaction score
168
Location
Kitchener, Ontario
Vehicle(s)
2017 Ford Focus RS SG
Bronco
Big Bend
Clubs
 
After two months of having it bone stock, it was time to stuff some 35's under it! Specs and notes below!

2021 Bronco Big Bend 4 Dr Mid Pack
2" Zone Lift
35x12.50R18 Falken Wildpeak AT3W's
18x9 -12mm Offset Fuel Octanes

Edit: YES THE CRASH BARS HAVE BEEN TAKEN OFF NOW AND RUBBING IS GONE.

Does it rub? YES. It rubs on both front and back crash bars on front wheels, I am thinking because of the -12mm offset. I looked at all the forums, all Zone's documents and figured the 35's would fit but they rub JUST over a full rotation of the steering wheel.

The Crash bars coming off and will be much better to drive.
Overall the Zone lift is a nice lift. The -12mm wheels stick out a good amount. They look GREAT and give it a very mean stance, however, I am in Ontario and the poke is not legal. Sasquatch Flares most likely going on.

VERY happy with how it turned out. If you have any questions, please let me know! Happy to answer any questions I can.

CFD3826E-9C4D-40FD-BD3A-B81688522C63.jpeg


9F7AED0D-508F-462D-A13E-450FEBADCF3A.jpeg


9248B9AA-DF4E-425E-A000-EA34A8947CB3.jpeg


4EEABAA6-D3E4-44C3-8D67-066745354C35.jpeg
Advertisement

 
Last edited:

HoosierDaddy

Base
Well-Known Member
Joined
Mar 6, 2016
Messages
3,563
Reaction score
8,686
Location
Indiana
Vehicle(s)
68&69 Broncos, 2021 ON THE WAY!!!
Bronco
Base
Vehicle Showcase
3
Clubs
 
Sharp rig. I like the profile views showing the lift/tire combo.

Waaaay too much poke for my taste.
-19 will be roughly two inches further out than Squatch.
 
OP
OP
ThatGuyatFord

ThatGuyatFord

Big Bend
Well-Known Member
First Name
Connor
Joined
Aug 27, 2020
Messages
78
Reaction score
168
Location
Kitchener, Ontario
Vehicle(s)
2017 Ford Focus RS SG
Bronco
Big Bend
Clubs
 
Sharp rig. I like the profile views showing the lift/tire combo.

Waaaay too much poke for my taste.
-19 will be roughly two inches further out than Squatch.
It is definitely a LOT of poke. It was more than I was expecting. But I do like it. I think it will look very good with the Sasquatch Flares.
 
OP
OP
ThatGuyatFord

ThatGuyatFord

Big Bend
Well-Known Member
First Name
Connor
Joined
Aug 27, 2020
Messages
78
Reaction score
168
Location
Kitchener, Ontario
Vehicle(s)
2017 Ford Focus RS SG
Bronco
Big Bend
Clubs
 
At least thats an easy fix, looks great completely changes the look
The bolts were in there VERY tight lol but a breaker bar got them out. Thank you! I’m very happy with the final product.
 

BroBronco

Banned
Banned
Banned
Joined
Sep 11, 2021
Messages
116
Reaction score
263
Location
N/A
Vehicle(s)
Ford Bronco
Bronco
Undecided
Looks good dude!! But It looks like maybe too much positive camber in the rear. Maybe adjusting the rear track bar will help bring in more negative camber or its just the big wheel offset and nothing you can do which over time may wipe out your wheel barings.

Here are some pics of mine with 37x12.5R17 and 3 inch lift. No rubbing in forward or reverse.

Ps-does anyone know if our broncos wheel hubs are Hubcentric or not? It feels like they are when the bronco is under throttle going over little bumps. Or it could just be me lol..

HYoqFdZT-166789555.jpg


IMG_0109.jpg


IMG_0110.jpg
 

malt_liqueur

Outer Banks
Well-Known Member
First Name
Chris
Joined
Apr 8, 2021
Messages
231
Reaction score
623
Location
Portland
Vehicle(s)
Tacoma
Bronco
Outer Banks
After two months of having it bone stock, it was time to stuff some 35's under it! Specs and notes below!

2021 Bronco Big Bend 4 Dr Mid Pack
2" Zone Lift
35x12.50R18 Falken Wildpeak AT3W's
18x9 -12mm Offset Fuel Octanes

Does it rub? YES. It rubs on both front and back crash bars on front wheels, I am thinking because of the -12mm offset. I looked at all the forums, all Zone's documents and figured the 35's would fit but they rub JUST over a full rotation of the steering wheel. Crash bars coming off and will be much better to drive.
Overall the Zone lift is a nice lift. The -12mm wheels stick out a good amount. They look GREAT and give it a very mean stance, however, I am in Ontario and the poke is not legal. Sasquatch Flares most likely going on.

VERY happy with how it turned out. If you have any questions, please let me know! Happy to answer any questions I can.
that looks great but man even with the bigger flares your doors are going to get chewed up with rocks arent they?
 

DrSquatch

Big Bend
Well-Known Member
First Name
Russell
Joined
Sep 9, 2021
Messages
334
Reaction score
883
Location
New England
Vehicle(s)
2020 Ford Explorer ST
Bronco
Big Bend
Clubs
 
After two months of having it bone stock, it was time to stuff some 35's under it! Specs and notes below!

2021 Bronco Big Bend 4 Dr Mid Pack
2" Zone Lift
35x12.50R18 Falken Wildpeak AT3W's
18x9 -12mm Offset Fuel Octanes

Does it rub? YES. It rubs on both front and back crash bars on front wheels, I am thinking because of the -12mm offset. I looked at all the forums, all Zone's documents and figured the 35's would fit but they rub JUST over a full rotation of the steering wheel. Crash bars coming off and will be much better to drive.
Overall the Zone lift is a nice lift. The -12mm wheels stick out a good amount. They look GREAT and give it a very mean stance, however, I am in Ontario and the poke is not legal. Sasquatch Flares most likely going on.

VERY happy with how it turned out. If you have any questions, please let me know! Happy to answer any questions I can.

CFD3826E-9C4D-40FD-BD3A-B81688522C63.jpeg


9F7AED0D-508F-462D-A13E-450FEBADCF3A.jpeg


9248B9AA-DF4E-425E-A000-EA34A8947CB3.jpeg


4EEABAA6-D3E4-44C3-8D67-066745354C35.jpeg
What gear ratio did you go with from the factory? Are you noticing any signs of any acceleration or driving differences?
 

Manotick Badlands

Badlands
Active Member
First Name
James
Joined
Sep 20, 2021
Messages
33
Reaction score
15
Location
Ottawa ON
Vehicle(s)
F150
Bronco
Badlands
Clubs
 
Looks good dude!! But It looks like maybe too much positive camber in the rear. Maybe adjusting the rear track bar will help bring in more negative camber or its just the big wheel offset and nothing you can do which over time may wipe out your wheel barings.

Here are some pics of mine with 37x12.5R17 and 3 inch lift. No rubbing in forward or reverse.

Ps-does anyone know if our broncos wheel hubs are Hubcentric or not? It feels like they are when the bronco is under throttle going over little bumps. Or it could just be me lol..

HYoqFdZT-166789555.jpg


IMG_0109.jpg


IMG_0110.jpg
Would you ID your side steps please.
 
Advertisement

 
4x4TruckLEDs.com
Advertisement
Top