PICS: Blown CV Axle - Need Passenger Side CV Axle Shaft

[MUDLVR]

UPDATE! CVJ Axle in Denver fixed it! They took the broken cage out, read the stamped manufacturer number on the broken cage, and low and behold - it's the same as a Raptor! They had a spare Raptor cage, the numbers matched up, and it's fixed!

Does anyone know where I can find a passenger side M210 axle shaft from a Sasquatch? Or if someone has a spare they are willing to sell to me and when the one I have on order comes in I'll send it to you?

Me and a buddy were installing a spacer lift kit on the Bronco. I was doing the drivers side and he was doing the passenger side. He had a bungee cord holding the knuckle, which had slipped, causing the axle shaft to pop out of the joint on the passenger side. He thought he popped it back in but he didn't and when I started driving it down my driveway I heard the knocking and grinding and I knew what it was.

I had the Bronco towed to the dealership and they told me that the CV axle shaft was toast and that Ford doesn't have any in stock.

Sponsored

 

[BigMeatsBronco]

There's a guy that's got a couple spares on here somewhere...

 

[MUDLVR]

There's a guy that's got a couple spares on here somewhere...

I've been searching with no luck. Do you have any leads on the person's name?

 

[BigMeatsBronco]

I've been searching with no luck. Do you have any leads on the person's name?

Sent you a message

 

[MUDLVR]

 

[Toccoa]

Ouch!

 

[BigMeatsBronco]

There's a guy on FB with 40s that did the same thing...his buddy wrecked the CV durring lift install.

 

[BroncoAZ]

Can you get one for a Ranger and if the length is different just swap the CV joint? Is there any difference between the shaft in the SAS vs non SAS Badlands? I thought the only width difference was in the wheel offset. Worst case remove both shafts and drive it in 2wd while waiting for the replacement to arrive.

 

[BigMeatsBronco]

Some Rangers do have the m210 FDU so is a very real possibility. I intend to find out.

 

[MUDLVR]

Can you get one for a Ranger and if the length is different just swap the CV joint? Is there any difference between the shaft in the SAS vs non SAS Badlands? I thought the only width difference was in the wheel offset. Worst case remove both shafts and drive it in 2wd while waiting for the replacement to arrive.

Thanks for that suggestion, I'll definitely look into that

 

[MUDLVR]

UPDATE! CVJ Axle in Denver fixed it! They took the broken cage out, read the stamped manufacturer number on the broken cage, and low and behold - it's the same as a Raptor! They had a spare Raptor cage, the numbers matched up, and it's fixed!

 

[BigMeatsBronco]

That's the best news I've heard all day! Thanks for posting. I love it when parts interchange. I'm guessing the axle shaft is a bit shorter

 

[shieldsy]

Props to CVJ Axle!

 

[MUDLVR]

That's the best news I've heard all day! Thanks for posting. I love it when parts interchange. I'm guessing the axle shaft is a bit shorter

Yes, the passenger side is shorter than the driver's side, is what they told me

Sponsored