flip's latest activity

??

Does the rear door lock or easy access work when the handle is touched?

Is the wiper, washer jet, hinge covers and wiring all there? Tinted glass? Where in KY are you? We have routes running to Louisville...

Blue Loctite

They may need to clear codes after the recall but the box we plug in programs the motor directly. Should not mess up any of your settings.

Not understanding which bolts/nuts exactly. One of these?

I don't have the time or energy but some supplier should come up with an aluminum reinforcement/replacement for this joint that overlays...

I would ask the dealer what specific reason are they denying the claim. Ford does not make this determination unless it's a very odd...

Just looked at locator and these dealers show some available.

I would lean to being covered as long as nothing is bent and no visible damage. That elbow is complete junk cast aluminum. When you do...

I would not switch between the fuse and controller (violet-green) due to the current. Go for the low current side (green-violet or...

The rear bow is available by itself, don't need to replace the whole frame. M2DZ-7851501-C has a list price of $1,710.42. Looking in...

Which engine, what year?

IIRC the 2015 F150 used a 7000 series aluminum and was virtually impossible to repair due to work hardening from dings/dents/hail/other...

501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks 2022 - 2023 Bronco Description and Operation Procedure...

If it has a trash can it's one time use. They will need 1- W720199-S440 3- W520213-S440 1- W719177-S439 1- W719178-S440 1- shock (has...

If it has a trash can it's one time use. They will need 1- W720199-S440 3- W520213-S440 1- W719177-S439 1- W719178-S440 1- shock...

IMO, if the reservoir is still hanging on and there are no signs of impact, it should be covered under base warranty. We had a '21...

Front Door Alignment Inspection NOTE: Removal steps in this procedure may contain installation details. NOTE: LH side shown, RH side...

The plant has a tool to do this adjustment, kinda similar to this one but on a 4 foot bar. That said, adjusting these is not very...

Here's my .02. Take all of the hard top panels off and remove the locating pins on the cap. Reinstall the cap with 2 hold down screws...

I did Bora 1" to keep stock SAS wheels on BFG 37's to help with a little clearance so I didn't have to cut. Not a big fan of spacers...

I'm late to this party but torque pull is a real and the first thing we do in the elimination process is swap wheels from side-side...

Going to play Mr. Raincloud as I'm not sure if anyone, including myself, mentioned this. As most of you know Ford continues to struggle...

I forgot some stuff. Factory camera relocation to work with high mount winches and in-vehicle option to enable instead of having to...

If I had to put one together today it would be a 4D BL, 2.7, SAS 2.5, BFG TA KO2, HD steering gear, no sway bar disco, MGV interior...

I still haven't figured out how Ford can't see people want more a-la-carte in their broncos. I don't do enough dirty stuff to worry...

Might like me some WT if they ever get rid of the crappy interior color and come standard with MGV/wash out floor. BL is superior in...

Just to clarify, when it blows hot, the volume of air coming from the vents doesn't change, it just starts putting out hot air for a...

On a different note, I just got a 4 channel Pico scope for my techs and was curious to know if you have or have used one. If so, thoughts?

I didn't look at individual circuits, that'll teach me.

Because it will kill the network? I assumed it would just kill the antenna but if it takes down the rear and side antennas too, that...

This should be in the rear roll bar trim by the light. It will probably kill outgoing but might jack up the low speed can.

Fuse 31 may kill the radio transceiver module. Probably still going to continue to gather data unless you pull wires from the...

Don't have pics from way back but at one point they were coating the splines with some kind of coating to help with the sticking but...

If your wife is the sales manager, she should know the answer or be able to find out through service but short answer is probably, no...

Nothing specific in the WSM for the MT, just the general procedure. Brake Service Mode Activation and Deactivation Activation...

Pics? Ford offers the outer skin but by the time you pay labor to replace, you're probably at or very near the cost of the whole shell...

Panels will come e-coated and will need to be sealed/epoxied, primed, painted, clear coated and components swapped from old to new...

Folks that do major audio upgrades do it routinely, my suggestion would be to fuse on each circuit so you're not relying on a mega fuse...

Think of the length of the studs as a dare, not a limitation.

You can stack all you want - the issue is usage. What is the total amperage draw of the accessories that you are using...

Sound correct. The fewer connections you have to any end device is always preferable. I'm a big fan of using non insulated butt...

The rear power point is on a 20A circuit 16ga wire from the battery junction box, uninterrupted, to the socket. If you're going to jump...

If you want to cancel, call Ford customer assistance with your VIN and miles. (800) 392-3673

Clock spring?

According to catalogue descriptions for suspension and other stuff.... Forum use-Ford non-SAS= standard suspension Badlands, non SAS=...

Was your WT involved in the steering gear recall several months ago?