Forged Method 207

[Bronkers]

Showcased on baja-prepped ranger raptor, not sure if those are 6x135mm like braptor, but link suggests will be compatible with 2022 (standard) bronco

Curious what they will weigh...

https://www.methodracewheels.com/products/207-forged-race-wheel?variant=1

Sponsored

 

[2020FordRaptor]

Showcased on baja-prepped ranger raptor, not sure if those are 6x135mm like braptor, but link suggests will be compatible with 2022 (standard) bronco

Curious what they will weigh...

https://www.methodracewheels.com/products/207-forged-race-wheel?variant=1

Those would look amazing in black.

 

[Tricky Dick]

Very nice. What an odd offset though.

 

[Bronkers]

Those would look amazing in black.

Yes...or was thinking white (with bedliner white top)

 

[Bronkers]

Very nice. What an odd offset though.

Had my vehicle in their website configurator so it wouldn't show me the size (in development)...ok good they are 6x5.5...

1/2" spacer might make them just right?

 

[Laminar]

Very nice. What an odd offset though.

The stock Ranger Tremor wheels are a 17x8 ET42, so these would be close.

Their website also claims the wheels were developed for rally class T1+, which requires tires to be tucked into the bodywork.

Seen in vertical projection, the bodywork must cover at least 120° of the upper part of the wheels (situated above the wheel axis as viewed from the side) and no mechanical component may be visible from above with the exception of shock absorbers, radiators, fans and spare wheels, including their anchorage points and attachments.

https://www.fia.com/sites/default/files/285_2022_wmsc_2022.10.19_jt.pdf

So it would make sense that they would maintain a stock offset rather than going for the poke that all the bros love.

 

[Silver-Bolt]

Any info on what they weigh or cost? 4000lb wheel is really strong. The cast Methods and most aftermarket truck/SUV wheels are 2500lb.

 

[Duds]

I’ve paused my wheel search since the Roswell got discontinued… this is a dream setup if it comes to market. Offset would let me run 285s right where my stock 255s sit right now. In theory they could be cheaper than their forged bead locks.

Sponsored