Calling all non-sas OBX - show off your new tires and wheels here!

[Southern Girl]

I’d love see everyone’s OBX tire and wheel combos with and without lift. If anyone has done the lift and changed the tires but kept the 18” wheels that would be sweet to see!!

Let us know what you did to make your ride unique.

There are several threads about this if you do a search. I kept the wheels and put on 33" KO2s.

Sponsored

 

[Oilman]

What tire/wheels do you have one there. I like the look.

what tire/wheel/lift combo is that?

What tire/wheels do you have one there. I like the look.

what tire/wheel/lift combo is that?

No lift -12 offset

 

[Shawn_1121]

RTR +30mm, same as the SAS wheel. Poke is a little over 1” which I think looks good. Crash bars are removed JIC there would be contact at full articulation. Here’s a pic. Hope that helps.

perfect amount of poke imo. just need to figure out if I'm doing a level kit or lift

 

[Robbie_S]

Man these all look great! We are putting in a 2" rough country lift with some SAS all black takeoffs tonight. I'll post a pic when we get her finished up.

 

[dbattle]

There are several threads about this if you do a search. I kept the wheels and put on 33" KO2s.

Thanks - I've been searching for days trying to figure out what I'm going to do. I'd love to do lift and 35's but I don't think that's in the budget this go around. I'm content with the factory 18's so at this point I'm just trying to figuring out what the biggest tire is that I can put on it is then go from there. I'd like a little poke but with the +55 offset on the stocks I don't think I'll be able to accomplish much of that.

 

[blackbronco]

No lift -12 offset

Whoa I was hesitant to go with similar specs since I don’t want to do a lift or wider flares, but it looks pretty good on yours.

Did you remove your crash bars, have any noticeable change in ride quality, and any chance you have pics of the poke? Thanks!

 

[Oilman]

Whoa I was hesitant to go with similar specs since I don’t want to do a lift or wider flares, but it looks pretty good on yours.

Did you remove your crash bars, have any noticeable change in ride quality, and any chance you have pics of the poke? Thanks!

The crash bars Were removed I will work on getting you a picture from the side it’s not that bad at first I thought I was gonna add wider fender flares but I kind of like the look the way it is. I really love those wheels As far as ride, didn’t change anything.

 

[Oilman]

Whoa I was hesitant to go with similar specs since I don’t want to do a lift or wider flares, but it looks pretty good on yours.

Did you remove your crash bars, have any noticeable change in ride quality, and any chance you have pics of the poke? Thanks!

 

[blackbronco]

Super helpful - thank you!

 

[Jeverall]

kind of wishing I had Sasquatch ….well, at least Sas flares …

 

[lakesinai]

Thanks - I've been searching for days trying to figure out what I'm going to do. I'd love to do lift and 35's but I don't think that's in the budget this go around. I'm content with the factory 18's so at this point I'm just trying to figuring out what the biggest tire is that I can put on it is then go from there. I'd like a little poke but with the +55 offset on the stocks I don't think I'll be able to accomplish much of that.

Goodyear has come out with their 275/70R18 version of the TerritoryMT, "C" rated, and should fit right on the stock OBX 18x7.5 rims. No lift. Adds 1" height for 33", and adds almost an inch of width. To run 285's, switch to 17" rims.

 

[mattymik]

kind of wishing I had Sasquatch ….well, at least Sas flares …

Sweet ride.

Also, check these out.

 

[BRCWHOA]

18x9 +25 fuel ammo 285/65-18 bfg’s no lift and crash bars still in

 

[Shawn_1121]

kind of wishing I had Sasquatch ….well, at least Sas flares …

What’s the details on these wheels

 

[Covey427]

37x12.50R20. Method wheels zero offset 2” lift

Sponsored