Recent content by jlatigo

Thr 3m 90 is what I've used.

I used 3m spray adhesive

a adding material to these bare areas should help, please post up your results!

QUOTE="soupcansam, post: 1794608, member: 43426"] Sorry if these are dumb questions and too many of them, but I went through the full thread and just wanted to make sure I'm doing this right (first time ever adding sound deadening to a car). Is the general process to first apply the kilmat...

It was very easy to take it all apart, it probably took me about an hour for the entire car to be made bare. Some of the clips are 2 piece clips and look broken but they snap back together easily. In my opinion it's a good solo weekend project to do the entire truck, or a quick Saturday project...

yes, they have a rubber plug under the carpet

https://www.amazon.com/dp/B0049VIQCK?ref=ppx_pop_mob_ap_share https://www.amazon.com/gp/product/B095P85BB7/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B017OECD7W/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1...

no idea on part # , but yes they are rebuildable

installing the shocks is strait forward and an easy bolt on, not sure on the upgraded tie rods, as they may have a different diameter thread? The steering rack is also doable but it is a bit involved.

i did the same( but not as good or as detailed ) to my 68 mustang about 8 yrs ago. It made a huge difference in how she feels and sounds.

thanks!

https://www.amazon.com/gp/product/B009GHQX5O/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B07B8TKWS1/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

nose dives down when braking like a gen 1 raptor, body roll is not bad for the height of it. Runs a lot like a gen 1 raptor( prob due to the same size shocks) of road at a good clip.

Oem version