Sponsored
jsoa's latest activity
-
-
jsoa replied to the thread 5 tire rotation is no joke!.truth be told the hardest part is getting the my 35s (soon to be 37s) back on the hub, even the spare is easier to put back on imo, I'm...
-
-
jsoa replied to the thread 5 tire rotation is no joke!.doesn't take much to roll the jack around (it's got wheels) 😁
-
jsoa replied to the thread 5 tire rotation is no joke!.glad I'm not the only one! whew
-
jsoa replied to the thread 5 tire rotation is no joke!.sooo, you have a spare, so lift one wheel at a time replace with spare, lower, lift next, replace with wheel you just took off, repeat...
-
jsoa replied to the thread Dinged up bash plates -- how to prevent rust.I agree with most here, Ive bent, scratched, even mangled my skids, I do take them off from time to time to clean the inside of dirt and...
-
-
jsoa replied to the thread 🚨 NEW RELEASE: 2021–2026 Ford Bronco Factory OEM Passive Keyless Entry Upgrade - Infotainment.com.While I don't need this, I do love watching your install videos, helps me understand how to safely take apart some of the interior of...
-
jsoa posted the thread Blank Screen Safety Recall Update (SYNC-26.2.1.6.5.3) in Issues, Repairs, Warranty, TSB, Recalls.Just saw this... (24 heritage) here is my software version
-
-
jsoa reacted to Eldowerks's post in the thread 🇺🇸 Honoring Those Who Served | EZ4X4 Memorial Day Sale! 15% Off Through Monday! with
Like.
Do a search on this site for realigning the two center front brackets for the front panels (the brackets next to the center overhead... -
jsoa replied to the thread 🇺🇸 Honoring Those Who Served | EZ4X4 Memorial Day Sale! 15% Off Through Monday!.ok but the videos I see of the flip top is on the MIC top, and like I said I can't just push the top up after unlatching it, it needs a...
-
jsoa replied to the thread 🇺🇸 Honoring Those Who Served | EZ4X4 Memorial Day Sale! 15% Off Through Monday!.I really want to get your flip top but I'm not convinced it'll work with the heritage top, since when I remove the front pieces it...
-
jsoa replied to the thread Camburg Billet Links.I get it these are super strong, but what would you rather have break, the links or the steel welded mounts on frame or axle? 😏
-
jsoa replied to the thread Camburg Billet Links.what am I missing? $2k seems ridiculously high just for lowers.
-
jsoa replied to the thread Custom HI-LIFT mount with TOR tailgate (WIP).honestly I initially over engineered it with the square cuts, after reversing the carriage bolts it's not required and a simple hole...
-
jsoa reacted to dgorsett's post in the thread Custom HI-LIFT mount with TOR tailgate (WIP) with Like.
I like your set up, more subtle, mine looks kinda poser especially with a new jack, but I'll keep it because yours looks too hard to...
-
jsoa replied to the thread Custom HI-LIFT mount with TOR tailgate (WIP).nice! I've considered moving the jack to that location, what did you use to mount it? something custom or did you find something that...
-
jsoa replied to the thread Bronco Saved notification.in case the matrix gets corrupted they can reload your bronco again
-
jsoa reacted to VantageLab's post in the thread LensJet™ — Plug-and-Play Rear Camera Washer Kit for the 6th Gen Bronco with Like.
Wow, that was fast! Nice job on the install. Sorry for the confusion, but sounds like you did it right. In the instructions I should...
-
jsoa replied to the thread LensJet™ — Plug-and-Play Rear Camera Washer Kit for the 6th Gen Bronco.received and installed mine today (TOR variant). Pretty easy install overall, a little harder for me since I have TOR tailgate and JCR...
-
-
Officially got the Bronco script!!! Love the classic look it provides on my bronco! 😍 -
jsoa replied to the thread Diff drop recommendation.dobinson diff drop doesn't have a bracket for the pivot point, perhaps you are looking at...
-
jsoa replied to the thread Diff drop recommendation.having both of them, and having removed and readded them a couple times my best suggestion for the diff drop is to mount the passenger...
-
Just wanted to share a few Bronco pics. Enjoy the weekend and happy trails!
-
jsoa replied to the thread Custom HI-LIFT mount with TOR tailgate (WIP).sorry I should if mentioned that I have aftermarket bumpers and d rings
-
-
jsoa replied to the thread Custom HI-LIFT mount with TOR tailgate (WIP).front and rear bumpers have d rings, sliders do have holes under it that may work but never tried, I consider the jack a last resort if...
-
jsoa replied to the thread Custom HI-LIFT mount with TOR tailgate (WIP).I should of updated this a while ago, I did reverse the wing nut and carriage bolt, and luckily the carriage bolts fit the Hi-Lift jack...
-
-
jsoa reacted to 5GENIDN's post in the thread What did you do TO / WITH your Bronco today? 👨🏻🔧🧰🚿🛠 with Like.
Well Done! beats my set up... Pretty handy out on the trail. Surprised me how often I use it... NOT all the time... just on certain...
-
jsoa replied to the thread Questions about the “shifting button”.can it really be called manual mode on an automatic transmission, perhaps manual'nt mode is better suited (sorry I'm just trolling) 😉
-
jsoa replied to the thread What did you do TO / WITH your Bronco today? 👨🏻🔧🧰🚿🛠.Wrapped up my "Trail Camera" setup inspired by @5GENIDN Uses the Naviks module to handle 3 video inputs, front, under front, under back...
-
-
jsoa replied to the thread HERITAGE EDITION Bronco Club.it's connected to the sync screen via Naviks module, here is a demo...
-
jsoa replied to the thread Sway Bar Disconnect Wire Connector/plug type..FWIW, I didn't use that harness, I followed these instructions from @BLUCYFR...
-
jsoa reacted to Ramble_Offroad's post in the thread Custom HI-LIFT mount with TOR tailgate (WIP) with Like.
I must admit, I’m digging this. Nice work. I recently deleted the 3rd brake light so the tire could be pushed all the way in and snugged...
-
jsoa replied to the thread FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!).no clue, never tried em, this software isn't just for broncos so I imagine it's for other vehicles, enabling them might just not do...
-
jsoa replied to the thread FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!).Yea I think easy mode is used mostly, and honestly im not an expert in this, easy mode makes this super simple. If anything I want to...
-
jsoa replied to the thread FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!).I used the spread sheet to locate the address, then made changes via easy mode, then loaded up the AS-BUILT section to find the address...
-
-
jsoa replied to the thread FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!).If you need the raw values, for 760-04-03 address Normal, Sport, Slippery, Mud, Sand, Rock Crawl 0100-0003-A315 or Normal, Sport...
-
jsoa replied to the thread FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!).Weird, it shows up on mine
-
-
jsoa replied to the thread NEW | Morimoto XB Tail Lights | Now Available.You will have no luck in this, im working on my 4th warranty claim with them, been through 2 or 3 different resistors and still has the...
-
jsoa replied to the thread FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!).In Forscan, load up the ABS module (easy mode) don't recall the name, but look for the values of the GOAT mode names, they should be...
-
jsoa replied to the thread HERITAGE EDITION Bronco Club.
-
-
jsoa replied to the thread HERITAGE EDITION Bronco Club.@JawnyBronco Give this man the prize! =) Under mount cameras (to see front and rear), the last pic is me thinking of attaching it to...
-
-
jsoa replied to the thread HERITAGE EDITION Bronco Club.it's definitely a mount and oddly enough it was inspired by something you did -- only clue I'll give 😉
-
jsoa replied to the thread HERITAGE EDITION Bronco Club.Started working on the next project... If anyone can guess what it'll be, @JawnyBronco will give out a Bronco6g premium heritage...
-
-
jsoa replied to the thread What did you do TO / WITH your Bronco today? 👨🏻🔧🧰🚿🛠.I swapped bumpers after I nudged a tree and the driver side bend in and started to scrap the wheel when turning, was surprised how easy...
-
-
jsoa replied to the thread FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!).just remove eco mode, it's useless
-
jsoa replied to the thread HERITAGE EDITION Bronco Club.added some final touches to the rear winch, easy controller access and light
-
-
jsoa replied to the thread Introducing VantageLab — Functional Bronco Accessories Built for OEM+ Integration.nice! glad to see you have a TOR variant, ordered
-
jsoa replied to the thread Hammer built winch mount.looking good. and yea If you ordered the inner cooler by it self it'll assume you are connecting to the OEM pipes and therefore supply...
-
You’re gonna love the hammer built high mount winch. The mile marker winch you have is also well made and very fast under load...
-
jsoa replied to the thread Hammer built winch mount.having done this recently, I'll be wondering if you run into the winch mount rubbing against the inner cooler like I did. I left it as...
-
