Recent content by Nabor19

I used this on my 2023 the first year, and touch up as needed annually. Project Farm on YouTube did a comparison and this rated high for staying power. Still looks new underneath after 3 winters and 30k miles. $36 for 4 cans was more than enough for my 2dr. It did help having a lift, I won’t...

Copper Clad Aluminum wire. It’s a bad conductor compared to OFC, Oxygen Free Copper. It requires at least one size larger wire to carry same load and has higher resistance. I would also add the blue wire taps used are poor connectors. They also make poor connections and can cause wire corrosion...

You could easily use two cross braces in the tie down holes and use two plates for a full size amd half size Packout. I also was considering a trailer tongue toolbox and welding up cross bar mounta to the tie down holes...

I bought the metal packout mount plate from Ebay for $55. There are several sellers or you could use the Milwaukee one but it is larger than the door

I wanted something that would mount securely and not walk away when the top was off. I went with Milwaukee Packout plate bolted to the cargo floor panel and the XL toolbox and tray.

Here is a thread from the ebay version being installed. https://www.bronco6g.com/forum/threads/ebay-mod-bumper.71571/

Does anyone make better tie downs for the rear floor in the Bronco? I have the rear cargo enclosure for when the top is off, and the stock ones are ugly without their plastic covers.

Well designed product from the looks of it. Solves many if the problems with the other ones on the market with the mounting bar to grab two studs and mounting the doors handle in. Good job!

Great write up. I did similar to my 23 BD base with sub delete. I’d suggest doing the sub with the Fusion amp and the 4 ohm 6.75 Kicker sub. For the cost, it is a good value and adds a fair amount of bass. I also installed bass blockers on the front and it now is pretty bright sounding. I may...

I went this route because they invluded the backing plate so the bolt did not dig into rock rail and scratch it up. I sprayed the inside of tube before installing as a rust prevention measure. ROADER Running Boards Side Steps for Ford Bronco Accessories 2021 2022 2/4 Door, Black Side Steps Bar...

I replaced all 6 standard speakers with Kicker DS series speakers with 600hz bass blockers on the dash speakers. My amp is the Fusion in recommended that I bought off Ebay. I first installed the 2ohm Kicker 6.75 and was happy. It was as described above a muddier sound that had more vibrations...

Has anyone tried this bumper? Take offs are a rare find it seems, and good aftermarket ones tend to have a winch mount. https://www.ebay.com/itm/404220193778

Enjoyed Off-Roadeo NH on Monday. Of course I chose the 2dr! Felt like the 4drs on the trail were like the 2-person go-carts racing against the singles! Everyone should do the 2dr at Off-Roadeo

Same here. Upgraded all speakers to Kicker and added the amp/sub to my delete option 2DR BD. Audio is pretty good and I am done With that upgrade

Yes please