My nearly completed build 2023 Wildtrak

[Charlotte Kev]

Don’t post a lot but I have my build like 95% done. Been working on it since I got it in early November.

2023 Wildtrak with following mods.

Recovery:
RC high winch mount
Warn Evo 10S
Mojab fairlead
Steeda from runner bar

Lights:
Heretic fog light kit
Turn Offroad pillar light mounts
Heretic Quattro ditch light kit
Heretic BA-2 ambers
Heretic 40” light bar (on order)
Heretic dome lights on roof rack (on order)

Protection:
Turn Offroad step and rock sliders
RCI fuel tank skid
RCI transfer case skid
RCI rear dif skid (I know not 100% needed…but while at it…)
Turn Offroad rear bumper with lights(slightly disappointed in this one…see below)

Suspension:
SVC perch collar kit (maybe my fav)
Black Rhino Fuji Gun Metal 17’s
MT Baja Boss A/T 35”
Borla high mount exhaust - Touring tuned

Roof:
Trailrax roof rack with Pak Rax

Interior:
Speaker upgrades in dash and went to 6.5” in rear
Bulletpoint dash mount with phone and iPad holder
Hooke road rear cargo shelf (my 2nd fav)

Also had a local shop do some graphics…not 100% satisfied…but have some thoughts for second attempt which would look better.

Sponsored

 

[JJ Bronco]

Looks great, shelf looks very useful.

 

[majorhavok]

Protection:
Turn Offroad step and rock sliders
RCI fuel tank skid
RCI transfer case skid
RCI rear dif skid (I know not 100% needed…but while at it…)
Turn Offroad rear bumper with lights(slightly disappointed in this one…see below)

I'm curious why you are disappointed. My wildtrak has the modular metal front bumper that I really like, but the cheesy plastic rear. I'm trying to find something that closely matches the aesthetic of the front. Can you elaborate?

 

[Charlotte Kev]

Looks great, shelf looks very useful.

Love the shelf. Extremely useful and not a lot of $$.

 

[Charlotte Kev]

Yeah…so I realize I never explained why I am somewhat disappointed with the Turn Offroad rear bumper. It 100% cosmetic, but does make it look a little cheap. There are only sensor cut out holes…no trim pieces around the sensor holes. The powder coat isn’t consistent as well. The lack of sensor trim pieces just makes it look really cheap.

 

[Turn Offroad]

Yeah…so I realize I never explained why I am somewhat disappointed with the Turn Offroad rear bumper. It 100% cosmetic, but does make it look a little cheap. There are only sensor cut out holes…no trim pieces around the sensor holes. The powder coat isn’t consistent as well. The lack of sensor trim pieces just makes it look really cheap.

Hi! Sorry you’re not satisfied with the sensor mounting setup. We have a couple of tricks up our sleeve to reuse your oem sensor housings if that’s something you’re interested in. I’m also curious about the powder coat inconsistencies you’re referring to. Could you shoot an email to us at [email protected]. If there is a defect we will 100% replace the part.

 

[Charlotte Kev]

I don’t think the bumper issues are that serious to require a replacement. Just some inconsistency on the finish. Lack of trim pieces for the sensors is biggest blemish. Love your products! Just think a little bit more could have been done with this one.

 

[Potter]

Don’t post a lot but I have my build like 95% done. Been working on it since I got it in early November.

2023 Wildtrak with following mods.

Recovery:
RC high winch mount
Warn Evo 10S
Mojab fairlead
Steeda from runner bar

Lights:
Heretic fog light kit
Turn Offroad pillar light mounts
Heretic Quattro ditch light kit
Heretic BA-2 ambers
Heretic 40” light bar (on order)
Heretic dome lights on roof rack (on order)

Protection:
Turn Offroad step and rock sliders
RCI fuel tank skid
RCI transfer case skid
RCI rear dif skid (I know not 100% needed…but while at it…)
Turn Offroad rear bumper with lights(slightly disappointed in this one…see below)

Suspension:
SVC perch collar kit (maybe my fav)
Black Rhino Fuji Gun Metal 17’s
MT Baja Boss A/T 35”
Borla high mount exhaust - Touring tuned

Roof:
Trailrax roof rack with Pak Rax

Interior:
Speaker upgrades in dash and went to 6.5” in rear
Bulletpoint dash mount with phone and iPad holder
Hooke road rear cargo shelf (my 2nd fav)

Also had a local shop do some graphics…not 100% satisfied…but have some thoughts for second attempt which would look better.

View attachment 608389

View attachment 608390

Is this a Hoss 3.0 Wildtrack? How are you liking the SVC Collars?

 

[Charlotte Kev]

Is this a Hoss 3.0 Wildtrack? How are you liking the SVC Collars?

Yes…it is 2023 so on the 3.0 platform. I definitely like the stance and it eliminates the rake (especially after attaching the winch). I changed out wheels and tires at the same time so hard to pinpoint the SVC impact on ride quality. I will say that with all the mods it is a bit of a different ride. Stock setup felt softer to me. Not an big difference but noticeable on bad pavement.

 

[Ford Motor Company]

Don’t post a lot but I have my build like 95% done. Been working on it since I got it in early November.

2023 Wildtrak with following mods.

Recovery:
RC high winch mount
Warn Evo 10S
Mojab fairlead
Steeda from runner bar

Lights:
Heretic fog light kit
Turn Offroad pillar light mounts
Heretic Quattro ditch light kit
Heretic BA-2 ambers
Heretic 40” light bar (on order)
Heretic dome lights on roof rack (on order)

Protection:
Turn Offroad step and rock sliders
RCI fuel tank skid
RCI transfer case skid
RCI rear dif skid (I know not 100% needed…but while at it…)
Turn Offroad rear bumper with lights(slightly disappointed in this one…see below)

Suspension:
SVC perch collar kit (maybe my fav)
Black Rhino Fuji Gun Metal 17’s
MT Baja Boss A/T 35”
Borla high mount exhaust - Touring tuned

Roof:
Trailrax roof rack with Pak Rax

Interior:
Speaker upgrades in dash and went to 6.5” in rear
Bulletpoint dash mount with phone and iPad holder
Hooke road rear cargo shelf (my 2nd fav)

Also had a local shop do some graphics…not 100% satisfied…but have some thoughts for second attempt which would look better.

We love to see everything you've added to your Bronco Kevin. Thank you for sharing with us.

 

[Valhalla]

Yeah…so I realize I never explained why I am somewhat disappointed with the Turn Offroad rear bumper. It 100% cosmetic, but does make it look a little cheap. There are only sensor cut out holes…no trim pieces around the sensor holes. The powder coat isn’t consistent as well. The lack of sensor trim pieces just makes it look really cheap.

You can get some cheap flat F150 performance rings on Ebay and drill the stock wider with a harbor freight step bit...

 

[Wildruby]

Yes…it is 2023 so on the 3.0 platform. I definitely like the stance and it eliminates the rake (especially after attaching the winch). I changed out wheels and tires at the same time so hard to pinpoint the SVC impact on ride quality. I will say that with all the mods it is a bit of a different ride. Stock setup felt softer to me. Not an big difference but noticeable on bad pavement.

How much sag did you get with the winch?

 

[Charlotte Kev]

You can get some cheap flat F150 performance rings on Ebay and drill the stock wider with a harbor freight step bit...

Not worth the trouble now that it’s on. I appreciate the tip however. Maybe if/when I get some down time over the summer I’ll check into it.

 

[Charlotte Kev]

How much sag did you get with the winch?

I didn’t have much of a rake prior to winch, but definitely did after. Didn’t measure but was noticeable.

 

[Ramble_Offroad]

Nice Bronco.

No truck is ever “really” compete.

Sponsored