Our Build... So far

[4x4TruckLEDs.com]

A little photo shoot of the build process. I still have a Baja Designs 8x XL Linkable Roof Mounted kit to go on, 37" Tires on 12x8.5 wheels, a 3" front/2" rear level/lift kit as well as some Camburg UCAs.

Build should be complete in about 2-3 weeks. But here is the progress so far.

Ohh and graphics. This is our demo truck so we're having graphics done on the side/hood for our shop.

Sponsored

 

[MorgansRun]

Have you run out of aux switches yet?

 

[De Brus]

Great pics! The new tires and wheels will totally change the look. Anxious to see what you picked!

 

[4x4TruckLEDs.com]

Have you run out of aux switches yet?

don’t have any
Bought truck off lot as is so I didn’t order the upfitter panel - I’m running a cheap auxbeam switch panel - works great

 

[4x4TruckLEDs.com]

Great pics! The new tires and wheels will totally change the look. Anxious to see what you picked!

I can’t wait for the tires and wheels - I’m not a fan of the stock ones

I went with Nitto Ridge Grapplers I’m 37x13.50 and VR Forged D14 wheels in 17x8.5 in a matte black finish

 

[j_marinelli]

I can’t wait for the tires and wheels - I’m not a fan of the stock ones

I went with Nitto Ridge Grapplers I’m 37x13.50 and VR Forged D14 wheels in 17x8.5 in a matte black finish

Look forward to see the picture with the wheels and tires! What lift will y'all be running (if any)?

 

[4x4TruckLEDs.com]

Look forward to see the picture with the wheels and tires! What lift will y'all be running (if any)?

FordBroncoLifts.com 3” front/2” rear level lift

 

[De Brus]

I can’t wait for the tires and wheels - I’m not a fan of the stock ones

I went with Nitto Ridge Grapplers I’m 37x13.50 and VR Forged D14 wheels in 17x8.5 in a matte black finish

Sweet, I dig ‘em! I wasn’t familiar with that wheel so I looked it up. For those who also don’t know, here’s what they look like.

 

[4x4TruckLEDs.com]

Sweet, I dig ‘em! I wasn’t familiar with that wheel so I looked it up. For those who also don’t know, here’s what they look like.

yup that’s them - available here:

https://www.4x4truckleds.com/vehicle-specific/ford/ford-bronco/2021-bronco/wheels-tires/

 

[shimmy825]

yup that’s them - available here:

https://www.4x4truckleds.com/vehicle-specific/ford/ford-bronco/2021-bronco/wheels-tires/

If i put 35's on here i'm assuming these would fit a sasquatch package with no needed adjustments, correct?

 

[4x4TruckLEDs.com]

If i put 35's on here i'm assuming these would fit a sasquatch package with no needed adjustments, correct?

Sasquatch already has 35s

 

[shimmy825]

Sasquatch already has 35s

i guess it was a dumb question - i just meant i can switch out the wheels no problem right? with no other adjustments needing to be made?

 

[4x4TruckLEDs.com]

i guess it was a dumb question - i just meant i can switch out the wheels no problem right? with no other adjustments needing to be made?

Ohh yeah, you shouldn't have any issues at all if you went with new wheels and kept the same tires.

Sponsored