Search results

Any installers in and around Houston who can install the electronic damping ICON shocks? I know of people that are great at the mechanical part of installing and dialing the shocks in properly and people that are great at electronics but not both. And since it’s such an expensive piece of...

I am running the Ford Performance Bilsteins with Dobinson's coilovers with 36.5 inch BF goodrichs and they had been working great for me for sometime. I had some overlanding gear too on my bronco earlier (about 70 lbs) that I have since removed. Recently I developed back issues and noticed that...

I was planning to put these 2 lights flush against my metallic rear stock bumper. Sat on it for some time and lost interest in the project. So these lights are up for sale. Quality products from DD, but the main thing that I bought them for is the triple functionality: you use it as a high-power...

Like new condition, raw aluminum make. Used for a whole of 2 weeks, its not compatible with my ADS sway bar links which touch it and make a noise from inside when it rubs, so I took it off. 1/4″ 5052 aluminum (12 lbs) **NOT COMPATIBLE WITH RAPTOR MODELS OR HOSS 3.0 EQUIPPED MODELS** . Here's...

Hello friends with Broncos with 4-4.5 inches lift, what kind of sway bar links are you using? I just broke my ADS links and anyways stock links keep the sway bar under preload and just make the vehicle unnecessarily stiff mostly because of their size. What are you guys using? Addition : I am...

LCA skid kit: I got this skid kit along with some other products I imported from FK industries (these are the guys that make the auxillary tank). They are very reputable in the Chinese rally scene and make solid products. I ended up not using it because I wanted to put the baja kits billet...

Rear bumper from my Badsquach. Was trying to add lights and make it pretty but the project never took off. It’s a very sturdy replacement to your plastic bumper and will take the rigors of off-roading.

I have side molle panels for a Bronco with a hard top. Like new condition. Just replaced my whole rear cargo management system, so have no use for these. They attach pretty well with brackets. Pick up in Houston or I can ship at your dime. It's not too heavy, so it would be worth it to ship it too.

Looking to sell my C bow brace kit ordered from Ford accessories but won’t fit my car because of bigger speakers and a rear cargo management system that occupies the holes in the back that it latches on to. Really thought I could make it work but some $550 later realized I can’t. My loss your...

Hi friends, 3 months ago, I thought of a project to replace my plastic rear bumper with an OEM metal badlands bumper and then attach 2 flush off-road rear lights. I bought all the materials needed, but the project never took off, and I have different priorities now. I also have the end caps for...

Front horn gussets for chassis reinforcement if you are running heavy bumpers or winch. Thick steel, encases on all 4 sides. Brand new!! Bought it from a Chinese company, very reputable in their rally scene, but could not fit it after putting on Mishimoto high mount intercooler. Pretty good...

Can work with both soft as well as hard top, priced to sell quick looks and works new, all hardware in place. It would be better to meet and pick up here at Houston. This is just too massive to ship out anywhere. Here's the link...

Selling a set of 4 Falken WildPeak A/T4W tires in 285/70R18, Load Range C (6-ply). ✅ Practically brand new – only ~150 miles on them ✅ No punctures, no plugs, no repairs ✅ Load C = smoother ride vs. heavy E-rated versions 📏 ~34” x 11.5” – largest size that will fit a stock NON-Sasquatch...

Just installed and used the Rough Country Class III receiver hitch on my 2022 Bronco. I didn’t install the wiring or tow package — it’s purely the hitch receiver. Features bolt‑on, no‑drill installation, rated for 3,500 lb towing capacity and 350 lb tongue weight. All included hardware is intact...

Just installed and used the Rough Country Class III receiver hitch on my 2022 Bronco. I didn’t install the wiring or tow package — it’s purely the hitch receiver. Features bolt‑on, no‑drill installation, rated for 3,500 lb towing capacity and 350 lb tongue weight. All included hardware is intact...

Selling a Fab Fours FB21-Z5251-1 Spare Tire Delete for Ford Bronco 2021–2024 (excludes Raptor). Installed for 6 months—decided to reinstall my spare to add weight for aftermarket suspension balance. ✅ Key Features: Direct fit for 2021, 2022, 2023, 2024 Ford Bronco (all trims except Raptor)...

Brand‑new, never installed. Bought for my Outer Banks build but switched to Carli rods before these ever left the box. Retail math: RPG sells this kit for $869. After 8.25 % TX sales tax that’s $941, and most shops still charge shipping on an 8 lb box—call it ≈ $1000 out‑the‑door. Grab mine...

Please see video. I just discovered the water draining into the dash. Doesn’t seem normal to me. I initially thought waterlogging was due to my skyrider top but seems like the moisture from the AC leaking in. What’s the fix? Anything quick??

so I was trying to use my allen wrench to vertically adjust the light by using it on the wheel for the light adjustment. Turns out the whole housing for that wheel is loose and can move 360. and when you wiggle it wiggles the light. it's fixed on the other side. what do I do to tighten it, just...

Do you have any plans to make a double swing arm rear bumper for Ford Bronco like you have for Jeep? There is a need in the market because everything existing is way overinflated in price, even in steel make.