TLDR: Check out the Hertz MPBX 250 S2 as a sub alternative.
I also have a MoBridge set-up and Hertz speakers. I went with Cento 4" in the dash corners and 6.5" in the rear pods. I used an Audison Prima AP4 mid-range in the center channel, although I am not sure if I really gain anything over...
Here is a side and rear angle shot. I used the included L shaped mounting brackets with the short side of the L facing down, to get it as low as possible.
I have a 4’ Rooftop Awning made by Roam. It is mounted at the rear of my TrailRax half-rack. It fits the width of the Bronco perfectly, and gives enough cover to utilize the tailgate area out of the sun and rain.
It sets up in minutes and can be put away in about the same time.
I would first reach out to Fraser @mObridge and see if he can tweak the tune file. His customer service is the best in the business.
At Fraser’s suggestion, I went with dedicated mid base speakers (Hertz MP Pro) in my kick panels. There’s really no reason to use 2-way speakers in your kick...
In a shocking turn of events, my Dad received a shipping notification for his SITH shackles this afternoon.
He ordered these 5 months ago during the memorial day sale.
I 100% agree with @MWILD . I installed the throttle body on it's own first, and then the manifold after (simply due to when I ordered them and me being impatient). While I did not notice much difference with the throttle body alone, when I added the manifold and gave the ECU time to adjust to...
The puddle lights are not. The underbody lighting is a FoMoCo product.
https://accessories.ford.com/bronco-2021-2024-underbody-illumination-courtesy-light-kit-vp2dz13d290a
I ordered the Bronco 2021-2024 Underbody Illumination Courtesy Light Kit from Ford accessories during their 20% sale last month. I had seen this kit several weeks ago, but it has been out of stock until recently.
Bluntly, the install instructions are garbage. They do not reference the correct...
I am looking to do the same relo with my King reservoirs to add Foutz rear bump stops. Any chance you have any pictures of your setup or Shredder that you mention above? Thanks!!