Search results

Having cut my teeth on 60's muscle cars, I always assumed the Bronco's horsepower and torque were advertising fluff the engine produced at ridiculously high rpms. The 2.3L is rated at 300hp/325 foot pound torque- pretty close to the 271 HiPer 289 of Mustang fame (Shelby boosted that to 306)...

Just came in the mail today. Apparently related to the software not loading properly in the previous recall to correct the rear view camera image from reappearing on the SYCH after completing a backing event in 4WD. I don't even use the back up camera, so I doubt I will take it in to get the fix...

(I realize this is of no interest for people looking to upgrade, but would be perfect for someone who had a fender bender with his base Bronco) Nice take off bumper for non Sasquatch Broncos. Tough to find a plastic one that isn't all scratched up. Mounting brackets included. No sensor holes...

Lots of work, but a coupla inches off the top would be awesome:

I am adding a factory 7 speaker subwoofer box (Bronco amplifier and 48CWRT674 subwoofer) to my 2022 6 speaker base system. I already installed a Kicker Key 200.4 amp by making my own harness (See This Post). The dash, kick panel and rear pop speakers are all factory original. I am assuming...

I'm too cheap to shell out the $ for a P&P harness and made my own. The pigtails and fuse wire come with the amp; all I needed to buy was a T harness to tap into the Bronco's wiring. Been doing this stuff for years, so I had shrink wrap, terminals, harness tape and wire to extend the...

Title says it all. I may be able to get a free 4 door box/amp/speaker assembly (7 speaker system, not B&O). Figured it would be a cheaper way to improve the sound in my 2 door 2022 with the base 6 speaker system for the cost of some wire and a little labor if it will fit.

New guy here. Finally got the truck I wanted to buy a couple years ago (Cyber orange two door Big Bend four cylinder automatic with 427 locker, trailer towing and modular bumper). Figured I better get it while I could still pick one up with lo miles now that the color has been discontinued.

Are the L/R stereo signals from the Sync Module analog or digital (See picture)? If the feed to the ACM is analog, this would be an easy place to splice in an Auxiliary 1/8" Phono Jack for an external analog device (IPOD, CD player etc). Worse case you could stick in an Analog to digital...