Search results

I’ve heard it’s happening to a lot of people too

Yep

Actually @Tilzbow yes we did have issues. I ended up using ForScan to program yours. After we programmed it, the Procal actually started to work correctly.

Yeah that stuff is legit. Reminds me, I need to order some more for the shop!

Actually, yours might be here this week! Install date might move up based on the rest of the schedule. The forecasted production times from 74Weld aren’t necessarily set in stone, and sometimes things may happen sooner or later than originally anticipated. Nobody will get left high and dry...

LMAO! That’s perfect🤣🤣🤣

It doesn’t matter what arm you have in there, it’s a matter of leverage against one bolt where there should be 2 bolts. I’ll try and make a post on this soon, but this week is hectic with the holiday.

I could make a new post with a link to the Raptor video we made, and give a time stamp. I discuss it a little in that video. It’s definitely an issue for those of us using the platform.

Absolutely necessary even if just running larger tires. I bent 2 upper bolts before the portals😬

So good, I added them to the Ranger Raptor with some slight mods to the factory live valve sensors bracket. Already tested them out on some pretty hard stuff at Texas Raptor Run and the truck held alignment the whole way through. Bronco is still holding alignment according to the new owner. One...

2021 Ford Bronco Big Bend. 30k miles, 2.3 with 10 speed. M210 front, M220 rear both have lockers and geared to 4.10 for a final drive of 5.0 at the wheels. 74Weld Portals and billet steering rack with Ford Performance internals. Raceline forged beadlocks +25 offset (hardware will be replaced)...

You can re-gear if you want but the owner of 74 didn’t and said he does mind it with the 38’s

No mine never came with it, and I’ve never taken the time to figure out what their logic was when determining which one got them and which ones didn’t

I don’t have it handy. Pretty sure I snagged them off Amazon because I was in a hurry lol

I used some Dorman studs but didn’t increase the stud size. I believe there will be a change to portals soon and that will move them to a 14mm stud, but not sure.

RockJock supposedly has one on the way to market and when it’s ready, I’ll try it out. It honestly has never been an issue on flat paved roads, only the uneven paved roads in Baja.

It is painted!

You’re dead on.

Yep, take offs.

Take offs from a ‘23 Wildtrak we built. So for all intents and purposes wildtrak suspension and portals. I believe this is the recipe for a great ride with the portals without creating any lift.