Search results

I have mine but it has been too cold to install :) hopefully soon. I also went with the heavy duty rear springs. Here are the weight specs C19-573V - Stock Load C19-575V 150-300lb Load

Just ordered my MRRs this week Can't wait to get them. Currently running 3" RPG perch collars and 3" body lift. The ride is not bad actually with the perch collars but really looking forward to the improved ride with the MRRs. Orded the heavy duty rear springs as I have a lot of gear in the...

Is there any reason this would not work with a hard top? It seems like there should be enough clearance to take the top on and off. Dave

Exactly why I did the Intake, charge pipes and Mishomoto intercooler all at the same time :)

What is the difference between NB3Z3280C and NB3Z3280F, the are both listed as inner tie rods for the Wildrak 22+ ? Dave

Makes sense. Have to check and see if there are some comparison videos out there of the KC against the Baja and the HF Dave

KC lists their Pro 6 lights as 21.3 watts, either they are lying or those can't be that bright. The Baja LP6 is listed at 100w which sounds much more beleivable. These are listed as 120w which is a little high, but only 20% more than the Bajas. Somethign seems fishy about the rating on the KCs

Aren;t the Baja's mounted completely different though? They ahve the bracked that mounts to the outside, which is much wider than the FF.70s,

For anyone that is still looking to do this, it took quite a while in trying different connectors, they are all way too big, I ordered a bunch of 3pin micro connectors from Amazon. Started at 1mm then 1.5mm, and it turns out 2mm is an almost perfect fit. I just had achillies surgern so I am out...

did you only run one wire down to the battery from the roof rack? And then one wire to the aux switch? Dave

I don;t see why they control arm skids would nto work. As far as I know the HOSS 3.0 is different coilovers but the rest of the suspension is the same. The only thing I can think of is the bottom Coilover bolts are different, but I can;t beleive that would make that much of a difference

I got the wpt-203 and it is way too big, I just ordered a WPT-328, I will try it when it comes in. It sucks that there is no way for the dealer to tell us what connector it is.

same here. I already have the backlighting form my dog and ditch lights. How did you figure out which pine on the mirror was which? I was afraid to just try them with a 12v + in case I blew something in the the bulb if I hit the wrong one Dave

This is awesome. I bought the Raptor lights like 6 months ago and was stuck on the same thing, finding the 3 pin connector :) It sucks that Ford doesn't sell the pigtail without buying the whole mirror. Do you know what the 3 pins in the light are? I assume one is ground, one is for the marker...

If we could get a certain number of people willing to order isn’t possible to make a batch ? Dave

What happenned? Was just going to order one :) Dave

I think I could figure out the wires coming from the body side, it is the 3 wire connector on the Raptor mirror lamp I would ahve to figure out and find a way to connect the wires without the connector :)

I think I could figure out the wires coming from the body side, it is the 3 wire connector on the Raptor mirror lamp I would ahve to figure out and find a way to connect the wires without the connector :)

It looks to me like there are 3 bulbs in the Raptor light. yellow marker light/turn signal front, read marker light rear and spot lamp. Maybe spot is one, marker is one and turn signal is the third?

I actually ordered the light from a Raptor to see if I could get it to work. Looks like the connector for the Raptor to the light is 3 pins and my Wildtrak is 2 pins. Does anyone know the part number for the Raptor connector by any chance?