Search results

if you don't have access to a local printer for ABS, you could try using craftcloud3d.com which bids out job on print farms all over the world. (i'd used this service for printing parts out before i had my own printer) i priced out black ABS (which oddly was less expensive than PLA) for the...

did you reset the BMS after installing the new battery?

when i put mine together a couple of years ago, had the same problem. definitely an assembly issue of getting the bow attached to the right holes in the side pieces.

did you beef up the mounting for the 12k winch or were most of the mods to meet the body lift?

the arb website seems to allow pairing the 12K version of the winch with the summit bumper. is that correct?

it was cheaper to pull out a grease pencil than spend the $$$ for a new injection mold

Will the universal garage door opener be prohibited on this ‘premium’ trim as well?

Were you thinking of the relatively low towing capacity which has been attributed to the soft suspension?

Has stellantis resolved the battery issue that recommended parking 4XE’s outdoor only away from structures?

the T-Case was in 4L

i see that some of the inputs require guessing about what's actually in your current tank. from observations of my current vehicles, the fuel gauges are non-linear especially below the half mark (probably due to the odd tank geometries) how does your app calculation deal with that issue?

need a sale on the summit winch bumper!

i didn't realize that F-150's also used under seat vents just our Broncos until i found this while searching for bronco vent covers. anyone have any experience whether this undersea system works well in the F-150's??

the pillar blockers have some effect, but 'everything works as expected' might be a bit of hyperbole

it's way worse when it snows even half that amount in the South

it could be worse... (found here at b6g)

do the rear vents actually send the proper temperature air into the rear passenger area? i'm still convinced the underseat vents are missing the connection to the rest of the HVAC system in my MY23

it's devolved into the minutia of A/C compressor operation which in it's own way is AS/S due to the use of a clutch

gotta wonder if this example's transmission is one of the rare '21s that didn't rattle

you do realize that the compressor doesn't run at full load at all times (and maryland has long periods during the winter without rain or snow. we're currently in a drought condition)