Search results

I'm pulling a Nücamp teardrop with the following specs that are close to what you want to pull: Dimensions & Weights: Exterior Length: 15' 3" Exterior Width: 6' 8" Exterior Height: 7' 8" Sleeping Area: 58" x 71" Interior Height: 69" Dry Weight: 2,105 lbs Tongue Weight (Dry): 208 lbs Total...

Loyalsock State Forest, Pennsylvania

Nothing like a Pennsylvania Hemlock forest with mountain laurels and snow! 🌲🌨

The darkness of Pennsylvania Forests

We need some pictures from Pennsylvania!

For related interest, here is a permanent air up / air down manifold setup with rotary unions at the center of each wheel. This is in Iceland where nearly zero trees or brush exist, unlike for me here in the East Coast, where these rubbing connections would get caught on everything! They are...

I'm with you... that's one of the reasons I got Cactus Gray as well. I also have limb risers to help minimize at least some of the pinstripes. I'd like to cover the whole thing in PPF, but that's a pricey thing to add, so I only have the PPF on the hood and the front corners of the quarter panels.

I can tell you aren't from PA or South Jersey because you said you took it down "to" the shore and didn't say, "Down the shore..." I looked, and sure enough... :wink:

The Allegheny National Forest, Pennsylvania

1) How hot was the ARB getting? I've got a cheap Harbor Freight single cylinder unit and it gets REALLY HOT! 2) I've been to Wharton, Allegheny National Forest, and Moshannon State Forest, but not AOAA yet (and that's the closest place to me! Lol). I've got the '21 Badlands with 33" BFG...

They're the same that my Badlands would have with Lux pkg. right?

Wow! That's a lot of stuff! I thought I had a fair amount of small gizmos to add, but not compared to this! 😃

This one from last year will have to do until there is snow this year.

I just got a set of black Paracord ones from Amazon. We'll see how long they are. Hopefully not like the drooping line maze things at the bank... that is if they still have those things since nobody really goes to the actual bank anymore!

I'll get those doors off at some point!

I opted for these IAG side steps that bolt into the rock rails. They also have dropped steps, but I didn't want to reduce clearance. I figured that these are easy to remove if I want to by simply loosening the clamp screws. They're pretty solid. On the other hand @PowPow , we kind of live...

Hey there... it's been a while and I started at the famous 1000 mark on this thread. Happened to see you have a dent that might need pulling. I haven't used this place before, but kept a mental note of it in case I needed it. Not even sure if you got it fixed yet, but thought I'd provide a...