Search results

Just sharing for awarness what I hope won't be a common occurence with the Warn Zeon XD winch platform. My winch was installed on an ADD bumper on my Raptor last February-ish. It stays on year-around. It's not covered and the winch gets minimal use. My Bronco is my everday driver, in...

I recently relocated my camera forward and lower in my bumper to accommodate replacing my OEM bumper with a winch capable bumper. Today I noticed when pulling into a parking spot, that the parking space lines don't line up in the 360 view - which I'm attributed to the cameras new location (at...

After having planned a series of mods for my previous Badlands which included a winch plate on the modular bumper, I ended up starting over with the build of my Raptor and took a completely different path. When I traded in my Badlands, I still had a stack of parts yet to be installed for the...

Does anyone make a filler plate for the OEM camera location in the grill when the camera has been relocated? I have a Raptor, but I suspect if there is a filler plate, it wouldn't be dependent on the model grill.

I just installed the Trailrax Half Rack on a 4-door - but haven't tried to remove the front and middle panels yet. I also installed it with the wind deflecter in its lowest position - but now I'm wondering if that was the best idea in order to not scratch the middle roof panel when removing it...

I have a 4-door and am looking for options/recommendations on a slide out tray for the cargo area that will still allow access to the infloor OEM storage compartments and allow me to secure gear (like a cooler, gear boxes, etc.). I also have a Trailgater tailgate table and would like to be able...

I've already overcome part of the lighting decisions analysis paralysis... I'm going with Baja Designs for my lighting. And, I've already started by putting XL80 clears on the A-pillars on the 15amp aux switch. And I've finally landed on a winch capable bumper so I can consider the rest of my...

I recently purchased the passenger front molle panel from Mountains 2 Metal for the side of the center console. The product info and instructions show this being mounted using the OEM bolts that secure the center grab handle. I have the graphite package and those bolts are counter sunk into...

I am considering getting the DV8 in-floor cargo box that replaces the OEM storage area and accommodates mounting a dual ARB compressor. I've combed through oodles of posts and have some specific questions I wasn't finding feedback on - RE Water Crossings and Water Penetration I'm known to find...

I'm considering the ADD Rock Figher Winch bumper - but noticed the product page includes the following - "*Note: WARN winches require aftermarket fairlead for fitment" I plan to use the Warn Zeon XD 12s winch and also have the Warn Elite 1.5 fairlead...

I recently traded in my 4-door Badlands Sas for a Raptor and need to find some new ways of mounting some of my gear. I was using the Desert Does It 3-sided molle panels that mount to the rear roll bar for my first aid kit, fire extinquisher and shovel, but with the additional roll bar brace on...

I'm looking at multiple 20" light bar options that I want to use with the RC High Winch Mount. Can folks share what other options, other than the one from RC, that they've used with this winch mount? For example, the S8 from Baja, etc.?

I'm looking for feedback from anyone that has put the Metalcloak 2.5 lift kit (full kit) on a Sasquatch - pros/cons, would you do it again? https://metalcloak.com/two-and-a-half-bronco-lift-kit-suspension.html

To remeidiate wobble/shake of my recovery board mount when mounted to an accessory arm on a tailgate reinforcement plate - I went with the Overland Kitted Spare tire rachet strap mount solution. My question now is how to slow down an honest thief - is there a way to secure the rachet in it's...

Looking for the OEM Winch Kit Frame Horn Reinforcement Parts only - plan to use with an alternate winch mount and already have a winch.

First - thank you for all of the comments and sharing for a collection of questions I had while research winch solutions for a collection of needs I have - I've stalked and posted on a variety of previous threads. For those just joining, I have a 4-door Badlands with the modular bumper and LUX...

I'm planning for a winch install on my rig - RC high mount plate LoD frame horn plates Warn 10-S (probably Platinum for the wireless remote and other features) Warn control relocation (to put the control box in the engine compartment) (probably the option from BAMF) This configuration checks a...

Badlands Sas Lux with modular bumper and looking for a winch mount option that - won't drastically impact approach angle will still allow for fog lights and/or light bar at bumper level will include or have an option of a bull bar to protect winch won't block the Bronco letters I was pretty...

I've done the search and review of various threads on here, as well as looking at various manufactures but haven't found exactly what I think I'm looking for. So - I thought I would post my features in a thread and see if anyone knew of something that would fit most of what I'd like. Quiet...

Got the 4-door Badlands Sas in February and this weekend was the first I had all of the MIC panels off. The top tension brackets for the rear panel have been rubbing paint off of the body on the top of the roll bar. I'll get with the dealer for needed repairs - but wanted to know what others...