After a recent oil change I noticed a small puddle on my garage floor. Brough it in this morning thinking it was related to the oil change, but was told that I had a bad rear output seal on my transfer case. 2023 Badlands 7MT. Parts on order...
Yes, I miss it. I liked resting my hand on the brake instead of the shifter and I liked tapping in the brake button. Little things, but oh well 🤷‍♂️
1) Adding a digital copy of the manual to my phone:
https://www.fordservicecontent.com/Ford_Content/vdirsnet/OwnerManual/Home/Index?Variantid=9196&languageCode=EN&countryCode=USA&VIN=1FMEE5DH7PLA81247&userMarket=USA&div=f&buildtype=web&vcode=1FMEE5DH7PLA81247&vfilteringenabled=True
2) Adding...
Any update on this? I have the same type of noise. Seems to only be noticeable at high speeds (50+mph) and it gets more noticeable the faster I go. I’d also describe it as a speaker static-like sound. I am assuming it has something to do with air coming in the outside vents, at the top of the...
@Klunatic thank you! I had been trying other methods, waiting 5 seconds each time and it was not working. The instructions you reposted worked for me!
For anyone who tries this, I did not have to press the window button all the way in or pull up to get the “auto” up/down. Simply press just...
Has anyone used the model from the Amazon link above on a badlands? The description says that it doesn’t work on that model. I’ve got a badlands and would be interested to know if anyone with a badlands has gotten this one to work?
Maybe I'm just being "cheap" but I was trying to avoid mods that required higher octane gas...the Ford tune and JB4 seem like they require that. Thanks for mentioning the JB4, though. I hadn't read much about it before your post.
For those with a manual transmission and Pedal Commander, what goat mode are you using? I don’t have PC yet, and Sport mode has been a big improvement in throttle response, but I feel like the steering and suspension is a little stiff, which I assume is part of the sport mode. Obviously...
Now that you have the PC do you still switch into the sport goat mode or do you leave it in Normal mode and let the PC adjustments give you the throttle response you want? Curious if there are any aspects of the sport goat mode that you want even though the throttle response may be provided by...
Finally got the exhaust installed. Incredibly rewarding feeling when it's done. Learned a lot about the vehicle in the process and have a huge amount of respect for people who work on their vehicles. Just a PSA for those that watch YouTube videos and think that swapping out your exhaust will...
Well, as it turns out you do not need to remove the existing hanger in order to mount the AWE adapter…apparently it just goes over it and there are a couple of nuts that I am just missing. Odd setup to mount the bracket like that. Not that instructions should be made for idiots like me, but it...
Thanks @Hockey13 !
I found this thread for removing the rear bumper. I’ll give that a try and hope removing that bracket makes more sense:
https://www.bronco6g.com/forum/threads/rear-bumper-removal-help-non-modular.61566/
I tried installing my new AWE cat back exhaust and it was a bit of a nightmare. Apparently everyone else can do it in under an hour, but I guess I’m not everyone 🤦🏻‍♂️…Anyway, I was nearing the end and ran into a real problem. I cannot remove the nuts on the exhaust hanger bracket so that I can...
I should clarify, I typically go to an automated car wash not my own pressure washer. If that’s the solution, that’s fine. I was just curious if folks who use Krown (or similar) were ignoring that warning about undercarriage washing or were actually going through the whole winter relying on the...
I just had a Krown undercoat applied and one of the things that I was told was not to do a high pressure undercarriage wash because it would wash off the protective film. I live in the northeast and normally wash my vehicle pretty often in the winter to remove salt. Has anyone else had Krown...
@4x4TruckLEDs.com that's some great information, thank you!
I was wondering, do you sell pigtails that work with the Mabett fog lights? The examples you provided below did not mention those designs. Maybe it matches one of the connectors you mentioned and I'm just unaware? Thanks for the help!