Capable bumper bull bar by IAG first photo!

[Shadowsquatch]

Thanks. I did sign up to get notified when it's back in stock. Hopefully the production constraints are resolved soon!

Sponsored

 

[f1loco]

Made me look - still not available.

 

[22BlackDiamondGreen]

For anyone doing a mount with a rough country wench mount, the wench mount is a half an inch wider than the spacing between the attach points the Winche to sit on top of the attach point I would recommend IG looking at this and providing spacers cause as you can see, I’ve got a gap between my bolts and my attach point

 

[NMWildtrak]

Got mine installed yesterday. Very easy to install along with a bumper swap. Took a little bit to find the instructions for the FMS until I realized that the recovery points are the base of the system. After that it was easy. Now to see if I can fit a light bar under the bar so my camera isn’t blocked.

 

[Ironiguana]

Got mine installed yesterday. Very easy to install along with a bumper swap. Took a little bit to find the instructions for the FMS until I realized that the recovery points are the base of the system. After that it was easy. Now to see if I can fit a light bar under the bar so my camera isn’t blocked.

That is what I am wanting to do with a Baja Designs S8. I think that should be thin enough to fit under there.

 

[RVBoffgrid]

Definitely interested, will it fit around a bumper mount winch mount? I have the RC high mount winch bracket on mine and would like some extra protection for the winch.

What model did you use with your Capable Bumper? I only see one for the Steel Modular Bumper?

 

[RVBoffgrid]

This is with the RC High Mount

Does the RC high mount work with the Capable bumper?? It only states with the Modular bumper. Love this set up right here!!!

 

[Dover157]

What model did you use with your Capable Bumper? I only see one for the Steel Modular Bumper?

The winch mount? Is rough country high winch mount. Website now says only for modular but works fine on the capable and does not need any of the spacers like it does for the modular. Trimming the plastic covers around the recovery loops is a bit of a pain but not a big deal.

 

[Shadowsquatch]

Bull bars are back in stock and I just placed my order. Looking forward to it!

 

[Ironiguana]

That is what I am wanting to do with a Baja Designs S8. I think that should be thin enough to fit under there.

I installed my Mini bull yesterday. It works nicely with the S8 underneath.

 

[NMWildtrak]

I installed my Mini bull yesterday. It works nicely with the S8 underneath.

Yep, that is what I was thinking. I'd like to get something a little wider though to fill in that space a little more completely. Maybe something that will bolt to the back of the bar, and hang underneath....

 

[Shadowsquatch]

I finally found time this past weekend to install the bull bar, the 5 piece amber grille light kit and ARB rear bumper. The bull bar was straight forward, my problem was having the right tools so it took me longer (no impact wrench…).

The light kit was more a pain (not as bad as the ARB bumper install though). The instructions didn’t quite line up with what I saw under the hood so I had to improvise. I also wired it to auxiliary 6 instead of to the fuse box so I can turn it on/off at my leisure.

I’m really liking how these look. Thanks @AdamF@IAG!

Time to update my profile pic!

 

[spidydt]

Just finished the install replacing my previous “bull bar light mount” thing..
Had to get the recovery hooks in red in honor of my wrx STI that was sold to purchase my Bronco

Needed to drill out the light bar mount to fit the Midland bull bar antenna but this was definitely worth the wait!

Sponsored