Hyperflash disable in ForScan?

[Jabberwock]

I picked up LED brake/rear turn signal bulbs and was wondering if anyone has figured out a way to disable hyperflash in ForScan?

Sponsored

 

[babraunagel]

I picked up LED brake/rear turn signal bulbs and was wondering if anyone has figured out a way to disable hyperflash in ForScan?

Have not heard of a FORscan solution this fast, however:

https://shop.advanceautoparts.com/p...vmowzsWQNAqxz2zqVPQaAqB7EALw_wcB&gclsrc=aw.ds

 

[Jabberwock]

Have not heard of a FORscan solution this fast, however:

https://shop.advanceautoparts.com/p...vmowzsWQNAqxz2zqVPQaAqB7EALw_wcB&gclsrc=aw.ds

Yeah the resistors is what I’m trying to avoid.

 

[Djd7]

On some fords there’s a “lamp out” option to deselect. Haven’t gotten my adapter yet so I can’t try just yet https://forscan.org/forum/viewtopic.php?t=2316

 

[Djd7]

This may be the places to look for in BdyCM

@Jabberwock good luck and report back!

 

[Jabberwock]

This may be the places to look for in BdyCM

@Jabberwock good luck and report back!

I was able to eliminate hyperflash last night in ForScan by going into one of the non as built modules. I don’t remember if it was the BCM or which one it was. I’ll go back in today on ForScan and check and I’ll post in the thread about how I did it so others can do the same if they want.

 

[Djd7]

In case anyone is curious, changing this config. in non as built bcm mod worked to stop hyperflash.

Sponsored