Sold: California ICON CDEV 2021+ Bronco suspension system $5500

[Dannebrog53]

I’m selling this ICON 2021+ Bronco CDEV suspension system for $5500. I paid $7000 for everything listed below. According to ICON this system fits 2 or 4 door Broncos with or without Sasquatch suspension. On a non-SAS Bronco you can expect 3”- 4” of front lift and 2”- 3” of rear lift. On a SAS equipped Bronco, you can expect 2”- 3” of front lift and 1.25”- 2.25” of rear lift. These measurements will be affected by the weight differences of 2 doors vs 4 doors, heavier aftermarket bumpers, winch and other additional equipment. The upper and lower trailing arms/links and track bar are not included. You can go to The ICON website and pull up the part numbers I've listed for detailed descriptions and info.

I purchased this system new last December but never installed it because I ordered 74Weld Portals. There’s a couple of scratches and dings that were on them when I received them from ICON and one of the boxes was busted open. I’ve included photos of this. I only posted a few photos if you contact me I can send you additional photos. This is local pickup only since these components weigh about 150 lbs total and are too expensive for me to ship and safely package. I live in Northern California between San Francisco and Sacramento.

ICON 48700E 21-Up Bronco Front CDEV Coilover kit

ICON 48710E 21-Up Bronco Rear CDEV Coilover kit

ICON 43501 21-Up Bronco IIC Install kit (includes controller)

ICON 611073 21-Up Bronco Rear 1.75” Link Hose Route Kit

ICON 198000 Coilover Spanner Wrench

Sponsored

 

[Speciosusnex]

Whats the part number for the whole package?

 

[35tires]

The package bust open and caused THOSE dents/scrapes/etc?

 

[Dannebrog53]

The package bust open and caused THOSE dents/scrapes/etc?

Yes the busted end of the package allowed the coilovers to move around and contact each other. Considering what the box looked like it’s amazing that there’s only those few scrapes and dings. When I decided to list them I very carefully put them on my furniture dolly with protective padding in between so I could get everything in one photo along with the seller ID paper required by the 6G Forum.

 

[Dannebrog53]

Whats the part number for the whole package?

I didn’t buy a complete stage 8 package because I wanted steel rear trailing arms and track bar for durability and I didn’t go with the ICON steel package because I wanted there billet UCA. I’m using CORE 4X4 steel rear trailing arms with adjustable length Johnny Joints at both ends. I mostly use our Broncos for trails and rock crawling so I go with steel components on the suspension

 

[Dannebrog53]

Whats the part number for the whole package?

I went to the ICON website and looked up the kits and these are the same components as used in the 40008 Non-SAS and 40018 SAS kits except there’s no billet upper and lower trailing arms/links or track bar. Hope this helps

 

[pandapaul]

Hey @Dannebrog53 does what you're selling include the billet UCAs? I see them pictured but not listed in the part numbers list you provided.

 

[Dannebrog53]

Hey @Dannebrog53 does what you're selling include the billet UCAs? I see them pictured but not listed in the part numbers list you provided.

Yes that price includes the billet UCA’s

 

[rock_it_Az]

Did you sell these?

 

[Dannebrog53]

Did you sell these?

Yes last week, sorry for not having updated the listing as sold

Sponsored