- Thread starter
- #1
I have done a bit of searching but can’t find the maker of this guard pictured. Any help would be appreciated. Or if one similar that will bolt on to factory bumper.
Thanks!
Thanks!
Sponsored
Last edited:
Sponsored
- Joined
- May 2, 2023
- Threads
- 3
- Messages
- 676
- Reaction score
- 1,965
- Location
- Big Sky Country
- Vehicle(s)
- Triumph Scrambler, Ferrari 458
- Your Bronco Model
- Badlands
Contact XComp Tires. I bet they know.
- First Name
- Jeremy
- Joined
- Aug 15, 2020
- Threads
- 1
- Messages
- 109
- Reaction score
- 188
- Location
- Bulverde, TX
- Vehicle(s)
- 2013 F250 4x4; 2013 Expy 4x4; 1984 F250 4x4
- Your Bronco Model
- Raptor
I believe it is the Westin brush guard
https://www.westinautomotive.com/product-detail/59-751255/xts-brush-guard-for-oem-front-bumper
https://www.westinautomotive.com/product-detail/59-751255/xts-brush-guard-for-oem-front-bumper
- Joined
- Sep 25, 2020
- Threads
- 16
- Messages
- 3,147
- Reaction score
- 8,197
- Location
- Western Maryland
- Vehicle(s)
- Sierra
- Your Bronco Model
- Base
Sponsored
OP
OP
- Thread starter
- #6
No complaints at all. I love the look and it has stopped some crap from hitting the lights offroad. Pushes things aside.
Install was easy enough. It comes in 4 parts so you want to start all the bolts for the center cross beam and you want to do it nicely so they are pretty straight. The bottom section is hard to adjust afterwards so tighten them down as straight as you can. Top you can get a socket wrench into them if they are already started and just use a twist joint or whatever the hell that socket part is called that lets you get things at an angle. you can snug them up through the back if you open your hood. I've actually taken it off to flip it over while the rest was attached to the truck.
So, its not a 1 peice walk in the park. But its not too bad like some people make it out to be.
I don't keep the radio mast on, but some more front on pics of it.
Last edited:
