My Custom Design Bronco Sunshade by JTopsUSA

[wunce1]

I was contemplating purchasing a sunshade. I then came across JTops Bronco Sunshade. I contacted them as I had noticed that there was an ability to customize the Bronco sunshade. I own the rights to the design that was used. After a period of questioning if I wanted to go with the soft top or the hard top version. I finally got back in touch with Kait Julson at broncosunshades She informed me that during the time of me being very indecisive they had upgraded their product and now had a dual top design. I decided to go with the dual top design as it meant that I did not have to choose which one that I would want to run. So we settled on that then she worked very hard on my copyrighted design to get it to work on the bronco sunshade. I received the product I installed according to the companies specifications and below is the end result. I am super impressed with the product as well as the graphic that was printed atop of my bronco sunshade. I would highly recommend this company and the product that they sell. I did not receive this product in lieu of a review, I did pay full price for the product. @JTopsUSA

https://www.broncosunshades.com/

Sponsored

 

[KRAKEN]

Very cool...

 

[JTopsUSA]

Hey this is Mike with JTops. Thanks for the comments!
I have a suggestion on fit though. Looking at the pic it could be stretched back tighter. All the wrinkles should come out.
You may have already done it looking at the interior pics!
Look great and happy we could help.
Thanks for becoming a customer.
Mike

 

[bstottlemyer85]

Hello, looks good, I had a question with your Squatch Basket, how did you handle that? Did you just leave the jtop hooks unhooked? Thanks in advance

 

[wunce1]

Hello, looks good, I had a question with your Squatch Basket, how did you handle that? Did you just leave the jtop hooks unhooked? Thanks in advance

Sorry for the late response, So the front of the Jtops has a solid rigid piece of plastic at the front. I marked out the hole location Drilled out just slightly bigger than the provide thumb screw. Using the Squatch basket thumb screws and fastened through that plastic piece back into the squatch locking tab. I do not use the j hooks provided by Jtops. Picture provide The flap will remain on top of the hardtop latches instead of below.

 

[bstottlemyer85]

Thank you, I went this route as well, and did some other changes, but haven't gotten to get back on due to weather. I will get pics uploaded when I get it back in place

Sponsored