Our 2021 4DR Bronco Badlands Build (with links)

[DV8offroad]

The front end is protected by our FS-15 Front Bumper. Installed in this bumper is a DV8 12,000lb Winch with synthetic rope, with an ADD Offroad Capture fairlead. Six Elite Series cube lights are installed at the center of the bumper, and a 13-inch Elite Series Light Bar is installed on the bull bar that sits below the Bronco logo. This bumper incorporates the factory parking sensors, and mounts easily without modifying your SUV. Underneath the front end we designed a pair of skid plates to protect the A-Arms when traversing tough trails.

It's riding on an Eibach Coilover Suspension, raising the Bronco 4-inches over the factory ride height. Our DV8 Offroad 883 17-inch wheels are wearing Falken 37x12.50R17 A/T3 Tires, giving it a formidable stance for off-road driving. For a build like this, it made sense to create Bronco fender deletes for maximum travel on the rocks.

Along the sides of the Bronco are our DV8 Offroad Tubular Rock Sliders, designed to fit close to the truck in order to not compromise clearance. These are dual steel tubes running parallel, with multiple cross members providing rigid protection to the vulnerable sides of the Bronco.

The rear end is protected by our low-profile DV8 Offroad Bronco Rear Bumper. This was designed to provide a better departure angle while providing superior protection. Two rear-facing DV8 Flush Mount Elite Series Cube Lights are installed in the bumper. The OEM Spare Tire Mount is secured with our Locking Spare Tire Gate.

We installed our DV8 Speaker/Light Mount Bar between the rear roll bars, which carries 2 Alpine speakers and our 6-inch Single Row LED Light Bar. Above the windshield is our DV8 Bronco Light Bar Mount which fits either a curved 50-inch light bar, or up to 12 pod lights. For this build we went with 12 Elite Series Cube Lights. The A-pillar accessory mounting locations feature our Dual Pod Light Mounts, with 2 Elite Series LED cube lights installed on each.

BUILD SPONSORS

• DV8 Offroad
• Falken
• Eibach
• Alpine

PARTS LIST*

• DV8 Offroad Bronco FS-15 Front Bumper
• DV8 Offroad 12,000lb Synthetic Rope Winch
• DV8 Offroad Front Skid Plate
• DV8 Offroad Rear Bumper
• DV8 Offroad Roof Mounted Light Bar Mount (Fits a 50-inch curved light bar or up to 12 cube lights)
• DV8 Offroad Fender Deletes
• DV8 Offroad FS-15 Series Rock Sliders
• DV8 Offroad Front A-Arm Skid Plates
• Alpine SPV-65-SXS Speakers
• DV8 Offroad 6-inch Single Row LED Light
• DV8 Offroad Elite Series LED Cube Lights
• DV8 Offroad Elite Series Flush Mount LED Cube Lights
• DV8 Offroad 883 17" Wheels
• ADD Offroad Capture Fairlead
• Falken Wildpeak 37x12.50r17 A/T3 Tires
• Eibach Coilover Suspension
• DV8 Offroad Spare Tire Locking Gate*
• DV8 Offroad Dual Pod A-Pillar Mounts*
• DV8 Offroad Tire Protection*
• DV8 Offroad Speaker/Light Mount*

*not available for purchase yet

Visit https://dv8offroad.com/pages/ford-bronco-bumpers-and-accessories to shop all of our Ford Bronco Parts and Accessories.
Plus... use code "ForumMember" at checkout for 10% off!​

Sponsored

 

[nkyhunter]

just looked and the rear bumper is not listed on your website just the old one, not the one pictured above in your post

 

[DV8offroad]

just looked and the rear bumper is not listed on your website just the old one, not the one pictured above in your post

That one should be available here in the next few weeks!

 

[NOVA Bronco]

That one should be available here in the next few weeks!

Any word on the release date for this rear bumper and the tire carrier?

Sponsored