Upper Dash Pad Upholstered in Leather?

[Rallyeadam]

Had a composites shop I know 1 off me the front dash.

I also have the the steering column cover being overlayed to match (much cheaper than redesigning that part)

Im taking inspiration from all the custom work I did on my other toy.

Would the composite shop be willing to do another dash?

Sponsored

 

[Tye]

For anyone looking to do this, you can also ship your parts to Rogelios as they have the patterns made for the dash and doors. That is what I did. Notice on my dash, I had them remove the factory stitch in the bend and make it 1 piece. While it requires more skill, the result is a much cleaner look.

 

[Danny's Bronco]

For anyone looking to do this, you can also ship your parts to Rogelios as they have the patterns made for the dash and doors. That is what I did. Notice on my dash, I had them remove the factory stitch in the bend and make it 1 piece. While it requires more skill, the result is a much cleaner look.

Your dash and doors looks so nice! How much about did it cost? $1000 or $1000's!

 

[Tye]

Your dash and doors looks so nice! How much about did it cost? $1000 or $1000's!

$1200 for upper and lower dash, and $250 per door panel (upper and arm rest) . Fwiw I went with the highest quality marine grade vinyl that runs $30/yard (average mgv runs $12-18/yd)

 

[Hbarr]

So the composite shop actually made you a new dash front in carbon fiber. Really look great

 

[roadsterlife]

$1200 for upper and lower dash, and $250 per door panel (upper and arm rest) . Fwiw I went with the highest quality marine grade vinyl that runs $30/yard (average mgv runs $12-18/yd)

do just pop off those trim pieces and mail them in?

 

[Tye]

do just pop off those trim pieces and mail them in?

yes

 

[Danny's Bronco]

$1200 for upper and lower dash, and $250 per door panel (upper and arm rest) . Fwiw I went with the highest quality marine grade vinyl that runs $30/yard (average mgv runs $12-18/yd)

That's really not bad. And for sure I don't think I would want to skimp on the fabric either. Wouldn't want to see that cracking everyday

 

[FatsWaller]

For anyone looking to do this, you can also ship your parts to Rogelios as they have the patterns made for the dash and doors. That is what I did. Notice on my dash, I had them remove the factory stitch in the bend and make it 1 piece. While it requires more skill, the result is a much cleaner look.

I'm curious, How did they wrap this around the bolt covers on the underside? Do you have any photos? Also is this the Rogelios in Baldwin Park? Only asking because I see your location is the Bay. Thanks!

 

[Tye]

I'm curious, How did they wrap this around the bolt covers on the underside? Do you have any photos? Also is this the Rogelios in Baldwin Park? Only asking because I see your location is the Bay. Thanks!

Yes in Baldwin Park, I boxed up and shipped everything down to them. They placed material over the bolt hole pop out covers so it
matches.

 

[FatsWaller]

Yes in Baldwin Park, I boxed up and shipped everything down to them. They placed material over the bolt hole pop out covers so it
matches.

Awesome, I live 30min from them so I think ill take a ride over there and talk with them. Thanks for the recommendation!

 

[Tye]

Awesome, I live 30min from them so I think ill take a ride over there and talk with them. Thanks for the recommendation!

Ask for Roger and let him know Tye with the Bronco raptor sent you.

 

[FordFamily4Fun]

Lot of great looks. I'd go with MGV over leather. I have a '16 Explorer where the seats are vinyl with leather inserts (for the luxury I guess). Vinyl much better in not cracking. And with the Bronco being open air...
https://www.allvinylfabrics.com/2022/04/26/pros-cons-of-marine-grade-vinyl-fabrics/

Sponsored