- First Name
- Robin
- Joined
- Nov 24, 2021
- Threads
- 9
- Messages
- 365
- Reaction score
- 579
- Location
- Calgary, AB
- Vehicle(s)
- 2 Door Cyber Orange Wildtrak Sasquatch
- Your Bronco Model
- Wildtrak
Following.
Sponsored
There is a full DSP built into this amp, so you can set all channel gains individually and channel limits individually. Can very easily tune for whatever speakers you are running.Thanks for the quick replay, i am not running factory speakers, but im also not running ones that can handle 75rms,, so that good to know that the amp can tone it down, huge plus for me in buying this.
as for the power, its just like a regular amp install i assume then, power, fuse, ground,, and remote is built into the factory harness stuff?
One last question, if i was replacing the sub, would i be running a duel coil bc of the factory wiring, or can i use whatever sub fits and there's a wiring harness to convert the factory connections to single coil
Look forward to completed "kit"
The software is downloadable from their website, you run it off your laptop. My Bronco is the test vechile. It is a very customizable powerful amp. I went with the Hertz speakers and a kicker 8” sub to replace the factory B&O system. Still doing some tuning and finalizing components. I can say it is night and day difference from the stock system. There will be a full build with pics and videos when it’s done.Damn this amp is awesome. You def got me sold on it.
are the options accessed via a laptop or on screen?
Thank you Fraser! This looks awesome, can’t wait to get my hands on a kit soonHi Eduard,
You're on the list!
Little sneak peak for you I verified the amp will mount in the factory location
i am also running Hertz speakers in all locations except the sub. I’ll update that when I go with this amp. They’re just like 30r/80p for the 4”. And 80r/240p for the kickersThe software is downloadable from their website, you run it off your laptop. My Bronco is the test vechile. It is a very customizable powerful amp. I went with the Hertz speakers and a kicker 8” sub to replace the factory B&O system. Still doing some tuning and finalizing components. I can say it is night and day difference from the stock system. There will be a full build with pics and videos when it’s done.
We have a tune done with Hertz cx100 across the dashi am also running Hertz speakers in all locations except the sub. I’ll update that when I go with this amp. They’re just like 30r/80p for the 4”. And 80r/240p for the kickers
I went with the Cento C165L also for the pillar speakers. Solid optionI have HERTZ Dieci Series DCX-1003 and HERTZ Cento Series C165L for my components.
If you have B&O it is on A2B, its as simple as that.Watching and definitely an upgrade that am interested in. Have a B&O system but how do I know its a A2B to buy and use this amp? https://mobridge.us/product/mobridge-bo-a2b-ford-amp/
Thank you, we think its pretty awesome too.Hi, @mObridge, this looks to be a pretty fantastic all in one product.
I was looking through the support video and may have missed it - is there an, "autotune" function built in using a frequency sweep for each speaker using a known microphone to capture the sweep? Or any chance of a phone app that uses the phone's microphone (since they're likely all the same hardware, outside of the pocket lint) to during the speaker's sweep to help the user tune the DSP?