I know folks say the auto high beam works off the camera in the windshield, but maybe check you reconnected the front camera wire and washer fluid hose on the passenger side - if you took off your grille, you would have had to undo those 2 lines before taking off the grille
I just upgraded the 2025 B&O on a raptor using the TrailSeven kits. The PAC interface takes the Ford A2B digital signal and converts to low level RCA which then plugs into whatever amp you want ( you choose how many channels you want) - for example on the kit I purchased it came with a 8...
Set of 5 wheels Race Relations Wheels in Matte Gunmetal. Been on the Bronco only about 3 months so pretty much brand new. 17x8.5 with a -12mm offset - comes with the centercaps and hubcentric rings to fit the Bronco perfectly! $500 for the set but only for pickup. Let me know if...
17" RRW RR7 Hybrid wheels on Wildpeak AT4 tires. Added bolts around the edges as I like the look without the trim ring. Only other thing was adding the ring spacer to the correct hub size! Wheels are super light (even with the heavier tires!)
Set of 5 17x9 0mm offset wheels and centercaps for SAS bronco fitment. Recently swapped out wheels and have these boxed ready to go to the next owner. If you are driving distance and want to come pickup they are free!! Used on Bronco for about 3 years and though they have some surface...
I think if your local shop has a good relationship with where they are getting the tires they can ask for replacements if they mount and balance and the roadforced index is above the acceptable value. I’ve had this happen many times buying thru the tire rack and shipping it to an installer. As...
Hi - Just putting out some feelers on vendors that might still have stock on these discontinued wheels (color/size/offset combo)...and a wheel/tire package would be even better for a Sas 2021 Bronco. If I can't find these I'll probably go with Fiveteen52 Range HD wheels in charcoal!
Let me...
This is a great post and I followed the DIY and it was perfect to the tee! Did the same thing where I bought the Raptor steering wheel off Ebay, swapped wheels intially in totality while I sent the original wheel off to get re-fitted with different leather. Then when it came back, I did the...
In my first post there are pics of what it looks like post install with 35s. My goal was to keep it as close to stock SAS height, so the rear is at the lowest setting ( about a .5” lift) so my default raised the front about 1.5 to make it the same height and get rid of factory rake ( setting 3...
You can just keep everything as is with factory heated seats. That is what I did - so you just buy the actual seat covers and nothing else from katzkin.