What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Gbauer]

What's it listed under, I saw another one on make a world that has a Bronco logo is that yours?

https://www.thingiverse.com/thing:7315474

He just uploaded it.

Sponsored

 

[Jakethesnake]

Added a rough country tubular rear bumper. Not a hard install once you learn to decipher the crappy instructions.
Having trouble with the license plate relocation light. The wire is way too thin a gauge and is hard to work with.

Looks good in my opinion and feels pretty solid

 

[Reddout99]

Added a rough country tubular rear bumper. Not a hard install once you learn to decipher the crappy instructions.
Having trouble with the license plate relocation light. The wire is way too thin a gauge and is hard to work with.

Looks good in my opinion and feels pretty solid

Looks good and follows the body lines pretty well.

 

[CitrusBronco]

Had the sawzall out, Max clearance kit installed and trimmed the rock sliders.
Been a busy week installing zone 2 1/4 lift, 37’s and a few upgrades to make them fit.

 

[Kboyts]

Busy past 2 weeks..315-70s, graphics, 3/4" body lift, new slider/step rails, color matched the shackles, and spiced up the interior.

 

[Hammerli22]

I asked Google to install my Ford performance winch that I'm too lazy to install, so this is what it generated. Now I'm motivated.

 

[Tybh88]

Is it going to make it out the door ?

Still fits after the lift and 37s

 

[N8do]

Put on rear lower control arm skid plates from Turn Off Road

This is one of the armor areas that the BL should have had installed from factory, along with rear shock mounts and cross member shields. The BL package is formidable and smart, but a couple low hanging fruit areas need some love.

I have wrapped it up with a rear diff plate as well. It is NOW a true BL armor package as it should be.

Great piece of mind!

 

[Beach_Bum]

Just to be clear - the rear interior joke isn't about being a moar door?

 

[PrepVet]

Waiting on recall parts to come in so it can get the three open recalls completed... and see how much they will charge me to fix the BLISS and Cross-Traffic faults (still probably will have to do it myself once the near three feet of fresh snow is gone).

 

[dgorsett]

I replaced my homemade/modified license plate bracket with the Turn Offroad version, very nice.

Pro tip: mount plate to bracket first. Also I did a couple things different on the wiring to make it easier or doable in my case

 

[jsoa]

Added the EPIC Crow MOLLE overhead rack the other day from @EPIC-4WD (with some slight modifications)

See my full post on the mods here https://www.bronco6g.com/forum/thre...verhead-rack-is-happening.126341/post-2769444

 

[Uncanny998]

Sent some money @Fast Intentions Inc. way.

Sponsored