- First Name
- Mike
- Joined
- May 1, 2026
- Threads
- 3
- Messages
- 31
- Reaction score
- 45
- Location
- California
- Website
- vantagelab.shop
- Vehicle(s)
- 23 Badlands Sasquatch
- Your Bronco Model
- Badlands
- Thread starter
- #1
Hey Bronco6G! Long-time member here (you may know me as MVILLA) and I'm excited to officially introduce myself as a sponsor of this community.
A little about me
I'm Mike — based in California and a '23 Badlands owner who got frustrated enough with a few things on my rig that I decided to engineer my own fixes. What started as a personal project turned into VantageLab, a small operation where I design and manufacture accessories specifically for the 6th gen Bronco — all in-house, right here in the USA.
About VantageLab
Everything we make is built around one idea: factory-plus integration. Plug-and-play fitment, no permanent modifications, made from engineering-grade materials. If it doesn't install cleanly and look like it belongs there, it doesn't ship.
LensJet™ — Rear Camera Washer Kit
If you've ever had snow, dirt, rain, or mud on your rear camera, you know the problem. The LensJet taps into your factory rear washer line via a Y-splitter and adds a dedicated spray nozzle aimed directly at the camera lens — completely plug-and-play, no drilling, no wiring.
Available for:
AirLock™ — A-Pillar Vent Grille Replacement
If you've ever run heat to the floor and felt warm air bleeding through the A-pillar vents anyway, you know the problem. It's a known HVAC quirk on the Bronco and it's annoying. The AirLock replaces your factory grille with a spring-loaded cam pivot design that snaps open and closed on demand — no tools, no tape, no workarounds.
Available in:
Check us out
Everything is available at vantagelab.shop — happy to answer any questions about fitment, compatibility, or anything else in the thread below.
Instagram: @vantagelab.shop
Bronco6G Exclusive Discount
As a thank-you to this community, use code BRONCO6G at checkout for 5% off your order.
Looking forward to being part of this community in a bigger way. Ask me anything — I'm happy to geek out on the engineering side, fitment questions, or whatever else you've got.
— Mike | VantageLab
A little about me
I'm Mike — based in California and a '23 Badlands owner who got frustrated enough with a few things on my rig that I decided to engineer my own fixes. What started as a personal project turned into VantageLab, a small operation where I design and manufacture accessories specifically for the 6th gen Bronco — all in-house, right here in the USA.
About VantageLab
Everything we make is built around one idea: factory-plus integration. Plug-and-play fitment, no permanent modifications, made from engineering-grade materials. If it doesn't install cleanly and look like it belongs there, it doesn't ship.
LensJet™ — Rear Camera Washer Kit
If you've ever had snow, dirt, rain, or mud on your rear camera, you know the problem. The LensJet taps into your factory rear washer line via a Y-splitter and adds a dedicated spray nozzle aimed directly at the camera lens — completely plug-and-play, no drilling, no wiring.
Available for:
- OEM factory swing gate carrier
- Turn Offroad aftermarket carrier
- Hard Top and Soft Top configurations
AirLock™ — A-Pillar Vent Grille Replacement
If you've ever run heat to the floor and felt warm air bleeding through the A-pillar vents anyway, you know the problem. It's a known HVAC quirk on the Bronco and it's annoying. The AirLock replaces your factory grille with a spring-loaded cam pivot design that snaps open and closed on demand — no tools, no tape, no workarounds.
Available in:
- Textured Black
- Carbon Fiber Finish
Check us out
Everything is available at vantagelab.shop — happy to answer any questions about fitment, compatibility, or anything else in the thread below.
Instagram: @vantagelab.shopBronco6G Exclusive Discount
As a thank-you to this community, use code BRONCO6G at checkout for 5% off your order.
Looking forward to being part of this community in a bigger way. Ask me anything — I'm happy to geek out on the engineering side, fitment questions, or whatever else you've got.
— Mike | VantageLab
Sponsored
